Check continuity between trip reset and illumination control switch connector and ground.
检查行程重置和照明控制开关接头和接地之间的导通性。
The outside mirror control switch is set to the center position.
the APU generator control switch is selected OFF.
APU发电机控制电门被选在断开(OFF)位。
The local control switch shall be identified with a sign.
本地控制开关应加标记予以识别。
Remove meter control switch from instrument panel assembly.
从仪表板总成上拆下仪表控制开关。
Disconnect trip reset and illumination control switch connector.
断开行程重置和照明控制开关接头。
Adjustment is done using the contrast control switch.
使用对比度控制开关进行调节。
Perform a unit check for the meter control switch.
执行仪表控制开关的单元检查。
Set the illumination control switch in maximum.
将照明控制开关设置为最大值。
Remove the power window control switch.
拆下电动车窗控制开关。
Disconnect the combination meter and meter control switch connectors.
断开组合仪表和仪表控制开关接头。
Perform the part check for the meter control switch.
执行仪表控制开关的零件检查。
The cockpit control switch actuates the dump valve.
驾驶舱控制开关调节倾泄阀。