Gesproken tekst vertalen, offlinefuncties, synoniemen, vervoegingen, educatieve spelletjes
Publiciteit
Registreer gratis: toegang tot meer resultaten en functies
cutting process is started
Vertaling van "cutting process is started" in Chinees
启动切割过程
开始切割过程
Before the cutting process is started, the workpiece must be placed in the loading position of the shuttle table.
在启动切割过程之前，必须将工件置于交换工作台的加载位置。
Before the cutting process is started, the work piece must be placed in the loading position of the shuttle table, the axes must be in the reference position and the safety gate must be closed.
在启动切割过程之前，必须将工件置于交换工作台的加载位置。同时，各轴必须位于参考位置，并且必须关闭安全门。
After acknowledging these messages, the cutting process is started in automatic mode.
确认这些信息后，切割过程以自动模式启动。
The cutting process is started with an inexact calibration!
校正不准确的情况下开始切割过程！
When this function is enabled, the cutting process is started before the water level is reached.
启用该功能后，切割程序将在到达相应水位之前进行启动。
When the cutting process is started, the distance is adjusted automatically at the reference point.
切割过程启动时，将在参考点自动调整距离。
After the 3rd calibration, the cutting process is started even if calibration is inexact.
第三次校正后，即使校正不准确切割过程也会开始。
Do not confirm the message Wait for material with CONT, because otherwise the cutting process is started without any material being ready, and the cutting head may hit the cutting grate.
请勿使用 CONT 确认待料信息，否则切割过程会在没有准备好任何材料的情况下启动，从而切割头会接触到切割架。
As soon as the signal lies below the level given by the parameter CutControl piercing level for a time given by the parameter CutControl piercing signal duration, CutControl recognizes that the through-hole has been made and the cutting process is started.
只要信号低于CutControl 穿孔等级参数规定的等级的时间超过CutControl 穿孔持续时间参数规定的时间，CutControl 认为已完成穿孔并开始切割过程。
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.
Woord & uitdrukking van de dag
Afbeelding van de dag
Resultaten: 9. Exact: 9. Verstreken tijd: 14 ms.
