Gesproken tekst vertalen, offlinefuncties, synoniemen, vervoegingen, educatieve spelletjes
Publiciteit
Registreer gratis: toegang tot meer resultaten en functies
in-system programming
Vertaling van "in-system programming" in Chinees
系统内编程
在线编程
在系统编程
Fast in-system programming allows software updates to be downloaded in seconds.
快速的系统内编程可帮助您在数秒内下载软件更新。
Most devices include in-system programming (ISP) for additional usage flexibility.
大多数器件具有系统内编程 （ISP ） ， 提高了使用的灵活性。
In one package, you have connection testing, in-system programming, non-JTAG device testing, serial number handling and configurable log files for your audit trail, ready to test up to four boards simultaneously.
用一套设备，你可以进行连接测试，在线编程，非JTAG器件测试，序列号处理和配置日志文件来检测跟踪，同时可以测试4块板。
In one package, you have interconnect testing, in-system programming, non-JTAG device testing, serial number handling and configurable log files for your audit trail.
在一个典型的测试工程中，涉及到互联测试，在线编程，非JTAG器件测试，序号处理和配置审计依据的日志文件。
Serial in-system programming (via two pins)
串行在系统编程（通过两个引脚）
Adding to this Micro SDCH flash card has high compatibility with the help of In-System Programming (ISP) feature.
添加到此Micro SDCH闪存卡与在系统编程（ISP）功能的帮助高度兼容。
Mature Devices Atmel offers a variety of high performance Flash 8051 microcontrollers featuring in-system programming (ISP).
Atmel 提供各种高性能闪存 8051 微控制器，其具有系统内编程 （ISP） 功能。
The XC9500 CPLD family provides advanced in-system programming and test capabilities. All devices have a minimum of 10,000 program/erase cycles. Extensive IEEE 1149.1 (JTAG) boundary-scan support is also included on all family members. The XC9500 family is fully pin-compatible allowing easy design migration. Advanced system features include output slew rate control and user programmable ground pins to help reduce system noise. I/Os may be configured for 3.3V or 5V outputs provide 24mA drive.
XC9500 CPLD 系列可提供高级系统内编程和测试功能。全部器件的最短寿命周期为 10000 次编程/擦除。所有系列成员均可支持扩展 IEEE 1149.1 （JTAG） 边界扫描。XC9500 系列兼容全部引脚，便于设计迁移。高级系统功能包括输出转换速度控制和帮助减少系统杂讯的用户可编程接地引脚。输入/输出可以配置为 3.3V 或 5V 工作电压。全部输出提供 24mA 驱动。
Atmel offers a low cost development kit for the designer who wishes to begin working with the AT17 Series of ISP FPGA configuration memories. The kit allows designers to read, write and in-system program any of Atmel's AT17 series family members directly from a PC. All standard file input formats produced by the various FPGA vendors are supported. The AT17 series devices can be programmed directly on the programming board or the board can be used to facilitate in-system programming of the AT17 series devices in the target application (cable provided). The ATDH2200E supports all Atmel AT17 series configuration memories.
Atmel 为低成本的开发套件，用于希望使用 AT17 系列 ISP FPGA 配置存储器开始工作的设计人员。该套件允许设计人员直接在 PC 上对任何一款 Atmel 的 AT17 系列产品进行读、写和系统内编程。支持所有 FPGA 供应商生成的全部标准文件输入格式。可以直接在编程板上编程，或者可以使用编程板在目标应用中加快 AT17 系列器件的系统内编程（提供线缆）。ATDH2200E 支持全部 Atmel AT17 系列配置存储器。
The XC9500 CPLD family provides advanced in-system programming and test capabilities for high performance, general purpose logic devices are in-system programmable for a minimum of 10,000 program/erase cycles. Extensive IEEE 1149.1 (JTAG) boundary-scan support is also included on all family members. The XC9500 family is fully pin-compatible allowing easy design migration across multiple density options in a given package footprint. Advanced system features include output slew rate control and user programmable ground pins to help reduce system noise. I/Os may be configured for 3.3V or 5V outputs provide 24mA drive. The FastFLASH XC9500XL family is a 3.3V CPLD family targeted for high-performance, low-voltage XC9500XL architectural features address the requirements of in-system programmability. Extended data retention supports longer and more reliable system operating life. Advanced system features include output slew rate control and user-programmable ground pins to help reduce system noise. Each user pin is compatible with 5V, 3.3V, and 2.5V inputs, and the outputs may be configured for 3.3V or 2.5V XC9500XL device exhibits symmetric full 3.3V output voltage swing to allow balanced rise and fall times.
XC9500 CPLD 系列可为高性能通用逻辑集成提供高级系统内编程和测试能力。全部器件均为系统内可编程，最短寿命周期为 10，000 次编程/擦除。所有系列成员均可支持扩展 IEEE 1149.1 （JTAG） 边界扫描。XC9500 系列兼容全部引脚，便于设计，可在一个给定的封装面积内提供多种密度选择。高级系统功能包括输出转换速度控制和帮助减少系统杂讯的用户可编程接地引脚。输入/输出可以配置为 3.3V 或 5V 运行。全部输出提供 24mA 驱动。FastFLASH XC9500XL 系列是一个 3.3V CPLD 系列，适于高性能、低压应用。XC9500XL 构架特点可满足系统内可编程的要求。扩展数据保存功能使系统工作寿命更长和运行更可靠。高级系统功能包括输出转换速度控制和帮助减少系统杂讯的用户可编程接地引脚。每个用户引脚兼容 5V、3.3V 和 2.5V 输入，运行输出可以配置为 3.3V 或 2.5V。XC9500XL 器件提供对称的全 3.3V 输出电压波动，使上升和下降时间平衡。
The TMBE893 is the programmer for Atmel's MARC 4 MTPs M48C893, M48C510, and the U9380. This programmer works together with the PC or stand-alone. In the stand-alone mode the programmer writes the last stored MARC 4 program to the target chip. The memory inside the programmer is buffered by an buttons and two LEDs on top control the operation of the programmer. It allows single chip as well as in-system programming.
TMBE893 是用于 Atmel 的 MARC 4 MTPs M48C893、M48C510 和 U9380 的编程器。该编程器可与电脑一起使用或独立使用。在独立模式中，编程器将最近存储的 MARC 4 程序写入到目标芯片中。编程器内部的存储器通过一个累加器进行缓冲。顶部的两个按钮和两个 LED 控制编程器的操作。它允许单芯片和系统内编程。
Method of in-system programming for TMS320C25 using computer serial port
利用微机串口进行TMS320C25的在线编程
In-system programming and debugging
系统内编程和调试
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.
Synoniemen voor in-system programming in het Engels
Woord & uitdrukking van de dag
Afbeelding van de dag
Suggesties
Resultaten: 31. Exact: 31. Verstreken tijd: 21 ms.
