Gesproken tekst vertalen, offlinefuncties, synoniemen, vervoegingen, educatieve spelletjes
Publiciteit
Registreer gratis: toegang tot meer resultaten en functies
set command
Vertaling van "set command" in Chinees
SET 命令
集"命令
Two new switches have been added to the SET command
在 SET 命令中添加了两个新命令行开关：
Caution: You will see this error when operating in master/slave mode as well. For example, even in the master/slave mode, SET command will be basically sent to all DB nodes to keep all the DB nodes in the same state.
注意：在主/备模式时你同样会看到这类错误。 例如即使在主/备模式下，SET 命令将会被发送给所有的数据库节点以保持所有的节点处于同一个状态。
$- Shows the current options used by the shell, the same as the set command.
$- 显示Shell使用的当前选项，与set命令功能相同。
SET command will not allow an equal sign to be part of the name of a variable.
SET 命令不允许变量名含有等号。
SET command is used to update the IPX configuration.
SET 命令被用来更新 IPX 配置。
SET command will set the ERRORLEVEL to 1 if the variable name is not found in the current environment.
如果在当前环境中找不到该变量名称，SET 命令将把 ERRORLEVEL设置成 1。
The SET command changes run-time configuration parameters. Many of the run-time parameters listed in in the documentation can be changed on-the-fly with SET. (But some require superuser privileges to change, and others cannot be changed after server or session start.) SET only affects the value used by the current session.
SET 命令修改运行时配置参数。许多在 Section 16.4 'Run-time Configuration｀｀ 里面列出的运行时参数可以用 SET 在运行时设置。 （但是有些要求使用超级用户权限来修改，而其它有些则在服务器或者会话 开始之后不能修改。）请注意 SET 只影响当前会话使用的数值。
If SET (or equivalently SET SESSION) is issued within a transaction that is later aborted, the effects of the SET command disappear when the transaction is rolled back. Once the surrounding transaction is committed, the effects will persist until the end of the session, unless overridden by another SET.
如果 SET 或者 SET SESSION 是在一个稍后退出的事务里发出的， 那么 SET 命令的效果将在事务回滚的之后小时。 （这个行为和PostgreSQL版本 7.3 之前的不同， 那个时候 SET 的效果在后面的错误之后不会回滚。） 一旦包围它的事务提交，那么其效果将持续到事务的结束，除非被另外一个 SET 覆盖。
In another embodiment, SNMP agent 40 may process the SNMP request PDU and filter criteria by applying the filter criteria as part of the query execution. As one example, PDU module 46 parses the varbinds included in the SNMP request PDU and generates queries to execute the command specified in the SNMP request PDU. The queries may correspond to a Get, Get-Next, Get-Bulk, or Set command, as specified in the SNMP request PDU. When PDU module 46 receives the data structure for the table associated with the operational OID, PDU module 46 applies the filter criteria to confirm that, if the command is applied to the column, the result satisfies the filter criteria and, therefore, would produce a valid result. In examples where application of the command produces a valid result, the values for the requested operational OIDs are received from MIB 44 and PDU module 46 generates an SNMP response PDU for sending to device management system 22A. The SNMP response PDU may include varbinds for the filter criteria as well as varbinds for the OID and value pairs. If none of the OIDs satisfy the filter criteria, the SNMP response PDU includes the varbinds specified in the SNMP request PDU with no changes.
在另一个实施例中，SNMP代理40可通过将过滤标准作为查询执行的一部分而处理SNMP请求PDU和过滤标准。一个示例为，PDU模块46分析SNMP请求PDU中包括的varbinds，并生成查询，以执行SNMP请求PDU中指定的命令。查询可与SNMP请求PDU中指定的Get、Get-Next、Get-Bulk或Set命令对应。PDU模块46接收与运行OID关联的表格的数据结构时，PDU模块46应用过滤标准，以确定命令应用到列时结果满足过滤标准，因此，会产生有效结果。在命令的应用产生有效结果的示例中，从MIB 44接收被请求运行OID的值，PDU模块46生成用于发送给设备管理系统22A的SNMP响应PDU。SNMP响应PDU可包括用于过滤标准的varbinds以及用于OID和值对的varbinds。如果没有OID满足过滤标准，SNMP响应PDU包括SNMP请求PDU中指定的varbinds，所述varbinds保持不变。
SET command invoked with just a variable name, no equal sign or value will display the value of all variables whose prefix matches the name given to the SET command.
可仅用一个变量激活 SET 命令，等号或值不显示所有前缀匹配SET 命令已使用的名称的所有变量的值。
The SET command is currently disabled. The SET command is an optionalConsole command that can only be enabled by using the the Configuration and Analysis snap-in.
SET 命令目前已经停用。SET 命令是恢复控制台命令的选用命令，要启用它必须使用安全性设定和分析嵌入式管理单元。
619 states that any command officer... who is emotionally compromised by the resign set command.
规定所有指挥官... 如果做出了危及任务的情绪化的决定 就必须要交出指挥权
a set command may also have more than one type declarations or assignments, separated by commas, but the type declaration and assignment to write separately, such as
一个set指令可同时有多个类型声明或赋值，用逗号分隔，但类型声明和赋值要分开写，如：
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.
Synoniemen voor set command in het Engels
Woord & uitdrukking van de dag
Afbeelding van de dag
Suggesties
Resultaten: 23. Exact: 23. Verstreken tijd: 22 ms.
