Engels

Arabisch Catalaans Chinees Deens Duits Engels Frans Grieks Hebreeuws Hindi Hongaars Italiaans Japans Koreaans Nederlands Oekraïens Perzisch Pools Portugees Roemeens Russisch Slowaaks Spaans Thai Tsjechisch Turks Vietnamees Zweeds

Chinees

Definitie Arabisch Catalaans Chinees Deens Duits Engels Frans Grieks Hebreeuws Hindi Hongaars Italiaans Japans Koreaans Nederlands Oekraïens Perzisch Pools Portugees Roemeens Russisch Slowaaks Spaans Thai Tsjechisch Turks Vietnamees Zweeds

Favorieten

Publiciteit

stop bits

Geflecteerde vorm van stop bit

Definitie

bits marking end of data packet in serial communication ... See more

Vertaling van "stop bits" in Chinees

Definitie

NEW

停止位

停止位数

Full control of baud rate, data bytes, stop bits and parity bits

对波特率、数据字节、停止位和奇偶位进行完全控制

Configure stop bits, flow control, parity control, data bits, highlighting, etc.

配置停止位，流量控制，奇偶校验控制，数据位，突出显示等

It is merely necessary to select a baud-rate and possibly other options (number of stop bits, parity, etc.) and load (or read from) the serial transmitter (receiver) buffer.

用户只需要选择少数几个选项，例如波特率、停止位、奇偶校验方式，然后向串行发送（或者接收）缓冲区发送（或者读取）数据。

The number of stop bits per transmitted/received byte.

每发送/接收一个字节的停止位数目。

Powerful "Send dialog" with flexible configuration options: stop bits, parity control, flow control, data bits, highlighting, etc. (PRO)

功能强大的"发送对话框 "，具有灵活的配置选项：停止位，奇偶校验控制，流量控制，数据位，突出显示等。

MR2A - 1 causes OPR to be reset automatically one bit time after the - characters 'in the channel A transmit shift register and in the THR, if any, are completely transmitted, including the programmed number of stop bits, if the transmitter is not enabled.

MR1A【5】＝1将使OPR【0】自动重置为，通道A发送移位寄存器以及THR（如有）的字符全部发送之后的一个位时间，并且如果未启用发送器，綦江包括停止位的编程数量。

The StopBits specifies the number of stop bits to be used. StopBits separate each unit of data on an asynchronous serial connection. They are also sent continuously when no data is available for transmission. Example: 1

StopBits 指定使用的停止位的数目。StopBits 将异步串行连接上的每个数据单位分开。但没有数据可供传输时它们还会继续发送。例如： 1

Be sure Stop Bits is set to 1.

请务必停止位被设置为 1.

Data Bits, Parity and Stop Bits are other parameters that must be set identically for communication to flow.

数据位，奇偶校验位和停止位是必须为通信流相同设置的其他参数。

The SettableStopBits property indicates whether stop bits can be set for this serial port. Values: TRUE or FALSE. A value of TRUE indicates the stop bits can be set.

SettableStopBits 属性表示是否可以为这个串行口设置停止位。值： TRUE 或 FALSE。TRUE 表示停止位受支持。