Vertaling van "the control microcomputer" in Chinees
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
at least one device connected to the control microcomputer
与所述控制微机连接的至少1个器件;
executing the boot loader program so that the second control program is loaded, the executing being performed by the control microcomputer
通过所述控制微机执行所述引导加载程序,进行所述第2控制程序的加载;
In this case, the control microcomputer 11 autonomously selects a suitable message from among plural kinds of messages, which are produced in advance, on the basis of operating history information concerning previous reproductions of music contents for the user.
accepting an interrupt signal requesting for the interrupt from the at least one device during the loading of the second control program and causing the control microcomputer to process the interrupt.
On the basis of this information, the control microcomputer 19 specifies a transmission power level to the transmission power control circuit 14 using the instruction signal.
控制用微机19根据这个通知,用命令信号φ1向发送功率控制电路14指示发送功率电平。
The amplification level control signal 317 is produced by the control microcomputer 307 calculating the compensation level based on the attenuation amount information 318 for each channel.
并且,该放大电平控制信号317在控制微机307中基于各声道的衰减量信息318计算出补偿电平而生成。
By calculating the delay time as described above, it is possible to adjust the output timing at which to output the amplification level control signal 317 from the control microcomputer 307 to the analog amplifier 304.
Further, a dedicated control logic may be used for forming each of the instructions from the control microcomputer 19 specifying a power decrease of a circuit like the attenuator 32 and specifying the transmission power level of the transmission power control circuit 14.
An output signal from the thermistor is converted into a voltage signal by a temperature detection circuit 26, and the voltage signal is then input to the control microcomputer 24.
并且,热敏电阻的信号在温度检测电路26变换为电压信号之后,输入至控制用微机24。
The comparator 50c outputs the difference between the counted result of the first terminal counter 50a and that of the second terminal counter 50b to the control microcomputer 60.
The count processing portion 94 of the control microcomputer 74 can process the counts of the encoder pulses by the encoder 66 to obtain the rotational position information (rotation angle) . omega. regarding the motor 64.
According to the battery 10 of this example, in the sleep routine, the operation mode of the control microcomputer 24 is periodically changed from the sleep mode to the active mode in which the battery condition is determined.
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.