If necessary, use manual severance cuts to reduce the sheet size.
Risks can arise in particular when loading and unloading the sheet.
Open the sheet in which you want to insert something.
打开要向其中插入内容的工作表。
This prevents the molten material from adhering to the sheet surface.
此操作可防止受潮材料粘附于料板表面上。
This applies to other parts as well as the sheet edge.
该条件也适用于其他工件及料板边缘。
Used if the sheet is already positioned squarely with respect to the axes.
用于料板已相对轴平直的放置时。
The piercing process takes account of the sheet temperature and alloy composition.
穿透过程会考虑料板温度和合金构成。
Switch to manual mode and separate the sheet manually.
切换至手动模式并手动分离料板。
Then adjust the height to line up with the sheet feed.
然后将高度调整为与料板送进器对齐。
The protective film comes away from the sheet in places.
保护膜在某些地方会从料板上脱离。
Rough cut surface from the center of the sheet down.
料板中心以下的切割表面呈现粗糙。
Pick up the sheet with the suction cups by pressing the symbol.
按该符号使用吸盘捡取料板。
Do not attempt to intervene while the sheet is in the process of dropping.
请勿尝试在料板脱落过程中介入。