Vertaling van "u-boot" in Chinees
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
B, if it is not boot upgrade, press the u-boot button on the motherboard, plug in the usb cable, this time will prompt "found a LOADER device", if there is no prompt to try again.
b、如果是不开机升级,按住主板上的U-boot 按键,插上usb线,这个时候会提示"发现一个LOADER设备",如果没有提示重试一下。
Images To use the Kernel you have to adjust your u-boot environment to support a Kernel of more then 2 MB or your have to change to the Qi Bootloader
要使用Kernel,你必须调整你的 u-boot 环境,让它可以支持超过 2 MB,或者是你必须修改 Qi Bootloader
The latter case leads to a garbled console output when the default baud rate differs between U-Boot and the kernel.
当 U-Boot 和内核之间的默认波特率不同时,后一种情况将导致控制台输出乱码。
Writing U-Boot environment from a text file
通过文本文件写入 U-Boot 环境变量
Type the following lines at the U-boot prompt to set the environment variables for booting from the card
在U-boot提示上输入以下行,通过设置环境变量从卡引导
These issues have been solved with newer U-Boot versions from v2014.07 onwards.
这些问题已经在 v2014.07 更新的 U-Boot 版本上得到了解决。
The autoboot framework in modern U-Boot versions works similar to the boot ordering options in a PC BIOS, i.e. it checks a list of possible boot devices for a valid boot image and starts the first one it finds.
现代 U-Boot 版本中的自动启动框架工作原理与 PC BIOS 中的启动顺序选项相似,即它会检查可能的引导设备列表,以获取有效的启动映像,然后启动所找到的第一个。
We continuously up-stream support for our latest modules into mainline U-Boot and the mainline Linux kernel
我们会持续在我们最新的模块上提供主流 U-Boot 和 Linux kernel支持
On some systems with older U-Boot versions there can be problems with properly relocating the Linux kernel, the initial ramdisk and the device-tree blob in memory during the boot process.
在具有较旧 U-Boot 版本的某些系统上,在引导过程中,在内存中重定位 Linux 内核、初始化内存盘和设备树 blob 可能会出现问题。
Many modern U-Boot versions have USB support and allow booting from USB mass storage devices such as USB sticks.
许多现代 U-Boot 版本支持 USB ,并允许从 USB 大容量存储设备(如 U 盘)启动。
U-Boot passes the content of the "bootargs" environment variable as commandline to the kernel, so any parameters for the kernel and the installer - such as the console device (see Avsnitt 5.3.1, "Boot console") or preseeding options (see Avsnitt 5.3.2, "Parametrar för Debian Installer" and Appendix B, Automatiserad installation med förinställningar) - can be set with a command like
U-Boot 将 "bootargs" 环境变量的内容作为命令行传递给内核,因此内核和安装程序的任何参数(如控制台设备 ) ( 请参见第 5.3.1 节 "启动控制台" ) 或预设选项(请参见第 5.3.2 节 "Debian 安装程序的参数">和附录 B, 使用预置自动进行安装 ) - 可以使用命令,如
As kernel Linux is applied, the initial starting sequence is carried out by using the bootloader U-Boot.
因为应用了Linux Kernel,由自举程序U-Boot执行初始启动序列。
If the system has originally used a U-Boot version older than v2014.07 and has been upgraded to a newer version later, the problem might still occur even after upgrading U-Boot.
如果系统最初使用的是早于 v2014.07 的 U-Boot 版本,并且以后升级到较新版本,则升级 U-Boot 后仍可能会出现此问题。