This affects both the bridge's zero point and its sensitivity.
This function interrupts machining at the zero point of the next plan or part.
The beam entry point is always defined relative to the machine zero point.
It is possible to change the zero point to a sensor if desired.
Use the hand-held controller to move to the required zero point.
使用手持控制器以移动到所需零点。
Air bag sensor unit does not record whether or not zero point reset is performed.
安全气囊传感器单元不记录是否执行零点重置。
But it is often possible to pull the survivor back close to the zero point.
但它往往是可以拉动幸存者回到接近零点.
The cutting plan must start at the zero point of the table section.
切割程序必须从工作台区的原点开始。
Check the condition as per the following and perform zero point reset again.
按如下步骤检查条件,并再次执行零点重置。
The instrument shall automatically move the laser ranging head and initialise the zero point of the vertical encoder.
仪器将自动移动激光量测头并初始化垂直编码器的零点。
A tare function to set the zero point can be activated by a pushbutton on the device or in the software.
设置零点的去皮功能可通过设备上或软件中的按钮激活。
Load the cutting table with a residual sheet and use the end stops to position it at the machine zero point.
在切割台上装载剩余料板并使用终点挡板将其定位至机床原点。