Vertaling van "Auto-sensing" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
For maximum investment protection, all models support auto-sensing speeds for backwards compatibility.
Für den maximalen Schutz Ihrer Investitionen unterstützen alle Modelle die automatische Erkennung von Geschwindigkeiten für Abwärtskompatibiliät.
In 2006, EMC introduced the UltraScale architecture and CLARiiON CX3 UltraScale systems, with more than 45 patents pending on unique capabilities such as peer-to-peer fault logging, virtual LUN technology, and auto-sensing of drive types.
2006 führte EMC die UltraScale-Architektur und die CLARiiON CX3 UltraScale-Systeme ein, für die mehr als 45 Patente für einzigartige Funktionen angemeldet wurden, zu denen die Peer-to-Peer-Fehlerprotokollierung, die Virtual LUN-Technologie und die automatische Erkennung von Laufwerkstypen gehören.
Auto-sensing for 1,2 and 4Gb architecture
Auto-sensing 1, 2, 4, and 8 Gbit/sec capabilities
Automatische Erkennung von 1-, 2-, 4- und 8-Gbit/s-Kapazitäten
Up to 24/64 ports Auto-sensing of 4/8/16/32 Gbit/s port speeds Locally switched port latency is 900 ns with FEC Learn More
Bis zu 24/64 Ports Automatische Erkennung von 4/8/16/32-Gbit/s-Portgeschwindigkeiten Die lokal geswitchte Portlatenz liegt bei 900 ns mit FEC
Four shared 10GBase-T interfaces broaden 10 Gigabit connectivity with auto-sensing RJ45.
Vier gemeinsam genutzte 10GBase-T-Schnittstellen erweitern die 10-Gigabit-Konnektivität durch automatische Erkennung an RJ45-Ports.
Auto-sensing automatic scanning laser barcode scanner with stand
Auto-sensing setup for simplified installation
Auto-sensing on network speed connectivity
100 to 240 V ac Auto-sensing
100 to 240 V ac Auto-sensing
Auto-sensing for uplink/downlink eliminates the need for expensive crossover cables.
Auto-sensing für den Uplink/Downlink macht den Einsatz von kostspieligen Cross-over-Kabeln überflüssig.
RJ45 - Auto-sensing ethernet network ports detect the speed of the device connected to it (10 Mbps, 100 Mbps, or 1000 Mbps) and adjust port speed and duplex accordingly.