Server Attrib - Dynamic BootP Support Enabled:TRUE
Serverattribute - dynamisches BOOTP aktiviert:TRUE
tServer Attrib - Dynamic BootP Support Enabled
tServerattribute - dynamisches BOOTP aktiviert
Allows traffic that uses BOOTP, DNS, and Net Time UDP ports.
Erlaubt Datenverkehr, der BOOTP-, DNS- und Net Time-UDP-Ports verwendet.
The address can optionally be entered via DHCP, BootP, ARP or with the joystick switch.
Die Adresse ist wahlweise über DHCP-, BootP-, ARP-Eintrag oder Joystickschalter einstellbar.
You should use the automatic IP configuration method if: your network uses DHCP or BootP to allocate IP information, or flexibility is needed.
Sie sollten die Methode der automatischen IP-Konfiguration verwenden, wenn Ihr Netzwerk DHCP oder BootP für die IP-Adressenzuordnung verwendet, oder Flexibilität erforderlich ist.
For the automatic assignment of the IP address in the network, alternatively DHCP or BootP can be used.
Zur automatischen Vergabe von IP-Adressen im Netzwerk kann wahlweise DHCP oder BootP genutzt werden.
Automatic configuration with DHCP and BootP Auto Install eases large deployments with a scalable configuration files management capability, mapping IP addresses and host names and providing individual configuration files to multiple switches as soon as they are initialized on the network
Automatische Konfiguration mit DHCP und BootP Auto Install erleichtert große Implementierungen mit einer skalierbaren Verwaltung von Konfigurationsdateien, Mapping von IP-Adressen und Host-Namen und stellt individuelle Konfigurationsdateien auf mehreren Switches bereit, sobald sie im Netzwerk initialisiert wurden.
You can set an HTTP proxy, define static network settings, turn on BootP, or renew the settings provided by a DHCP server.
Sie können einen HTTP-Proxy einrichten, Einstellungen für ein statisches Netzwerk definieren, BootP aktivieren oder die von einem DHCP-Server bereitgestellten Einstellungen erneuern.
If BootP is supported (as for the RCM appliances), it is visible instead of DCHP.
Wenn BootP unterstützt wird (bei RCM-Einheiten), wird dieses Feld anstatt DCHP angezeigt.
(If you are connecting your remote software to the previous 2161DS, you will need to use BootP instead of DHCP).
Wenn Sie Ihre Remote-Software mit dem vorhergehenden 2161DS Switch verbinden, müssen Sie BootP anstelle von DHCP verwenden.
Multiple boot agents supporting RPL, BootP, and PXE
Multiple Boot Agents mit Unterstützung für RPL, BootP und PXE
The DSR supports both BootP (a subset of DHCP) and static IP addressing.
Die DSR-Einheit unterstützt sowohl BootP (ein Unterprotokoll von DHCP) als auch statische IP-Adressierung.
Using DHCP or Using BootP: Choose one of these if you receive an IP address automatically from your ISP.
DHCP oder BootP: Wählen Sie eine dieser beiden Optionen aus, wenn Sie von Ihrem Internetanbieter automatisch eine IP-Adresse erhalten.