Vertaling van "DMX-output" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Each DMX-output is assigned with a port out of node 2
Jedem DMX-Ausgang ist ein Port aus dem Node 2 zugeordnet
Solder a 120 ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit. 3.
Löten Sie einen 120 Ohm 1/4W Widerstand zwischen Pin 2(DMX-) und Pin 3(DMX+) in einen 3-Pin XLR-Stecker und stecken Sie ihn in den DMX-Ausgang des letzten Geräts.
2 ports (per 512 DMX-channels) will be spent on each DMX-output consecutively.
Auf jedem DMX-Ausgang werden 2 Ports (je 512 DMX-Kanäle) hintereinander ausgegeben.
22/32 23 Occupation of the XLR-connection: If you are using controllers with this occupation, you can connect the DMX-output of the controller directly with the DMX-input of the first fixture in the DMX-chain.
Belegung der XLR-Verbindung: Wenn Sie Controller mit dieser XLR-Belegung verwenden, können Sie den DMX-Ausgang des Controllers direkt mit dem DMX-Eingang des ersten Gerätes der DMX-Kette verbinden.
An additional Extension-mode allows an output of 1024 DMX-channels on each DMX-output.
Ein zusätzlicher Extension Mode ermöglicht die Ausgabe von 1024 DMX-Kanälen auf jedem DMX-Ausgang.
Building a serial DMX-chain: Connect the DMX-output of the DMX LED Operator 1 with the DMX-input of the nearest device.
Aufbau einer seriellen DMX-Kette: Verbinden Sie den DMX-Ausgang des DMX LED Operator 1 mit dem DMX-Eingang des nächsten Gerätes.
DMX-output for controlling DMX-capable devices is possible, too.
Eine DMX-Ausgabe zur Ansteuerung von DMX-fähigen Geräten ist alternativ auch möglich.
Slave: Connect the DMX-output of the master device (XLR female) to the DMX-input of the slave device (XLR male).
Slave: Verbinden Sie den DMX Ausgang des Master Gerätes (XLR female) mit dem DMX Eingang des Slave Gerätes (XLR male).
Plug the terminator with a 120 between Signal (-) and Signal (+) in the DMX-output of the last fixture.
Dazu wird ein 120 Widerstand in einen XLR-Stecker zwischen Signal (-) und Signal (+) eingelötet und in den DMX-Ausgang am letzten Gerät gesteckt.
On starting the DMX-Output the step timers are activated.
Beim Start der DMX Ausgabe wird auch der Schritt-Timer aktiviert.
The start/stop of the DMX-Output happens automatically on the start/stop of a laser show.
Start/ Stop der DMX Ausgabe erfolgt gleichzeitig mit Start/Stop der Laser Show Ausgabe.