For this purpose, modulated light is radiated from an IR LED.
Dazu wird moduliertes Licht von einer IR-LED ausgestrahlt.
The IR LED is not meant to illuminate large areas.
Die IR-LED ist nicht zur Ausleuchtung großer Bereiche gedacht.
The transmission depends on the IR LED.
Die Abstrahlung ist von den IR-LED abhängig.
Now hold the IR LED in the vicinity of the probe.
Nun halten Sie die IR-LED in die Nähe der Sonde.
High-power IR LED for night vision, range up to approx. 20 m
High-Power IR-LED für ca. 20 m Nachtsicht Reichweite
This maximum 2 IR LED are possible in parallel.
Dadurch sind maximal 2 IR-LED parallel möglich.
For example, you can place the IR LED mounted on the underside of your vehicle and hide the fototransistor in the roadway.
Beispielsweise kann man die IR-LED an der Fahrzeugunterseite montieren und den Fototransistor in der Fahrbahn verstecken.
・ IR LED is controlled to match the environment, thereby the camera provides clear images of human faces without white blur.
Die IR-LED wird der Umgebung entsprechend gesteuert, dadurch liefert die Kamera klare Bilder menschlicher Gesichter ohne weiße Unschärfe.
High quality camera hidden in motion detector with IR LED night vision up to 10m, suitable for continuous recording.
Eine hochwertige Kamera versteckt im Bewegungsmelder mit IR-LED Nachtsicht bis zu 10m, geeignet für kontinuierliche Aufzeichnung.
The trailer signal is taken from the decoder via a series resistor of 220 ohms and transferred to an IR LED.
Das Anhängersignal wird über einen Serienwiderstand von 220 Ohm vom Decoder abgegriffen und auf eine IR-LED übergeben.
If there is absolutely no light and no residual light either, the integrated IR LED can be activated at the touch of a button to provide bright images.
Wenn absolut kein Lichtschein und kein „Restlicht" vorhanden sind, wird auf Knopfdruck die integrierte IR-LED aktiviert, um für helle Bilder zu sorgen.
The constant "cH" says that this is an active signal, which means that the IR LED is switched on in the first part of the signal.
Die Konstante "cH" gibt an, dass es sich um ein aktives Signal handelt, das heißt dass die IR-LED entsprechend beim High-Signal eingeschaltet wird.
Align the IR windows between the transmitter and the receiver so that the IR LED illuminates red.
Die Infrarot-Fenster zwischen Sender und Empfänger so ausrichten, dass die IR-LED rot aufleuchtet.