We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
LED schnell blinkt
After successful synchronisation, the red LED flashes rapidly.
Nach erfolgreicher Abstimmung blinkt die rote LED schnell.
If the LED flashes rapidly in red, the conditions for operation have not been met or a fault has occurred.
Wenn die LED schnell rot blinkt, sind die Voraussetzungen für den Betrieb nicht erfüllt oder es liegt eine Störung vor.
Press and hold the button until the LED flashes rapidly, then repeat until it blinks slowly.
Das erste Mal, bis die LED am Gerät blinkt, das zweite Mal bis sie nur noch langsam blinkt.
Press the button again for at least 4 seconds until the LED flashes rapidly, then release the button again.
Drücken Sie die Taste erneut für mindestens 4 Sekunden, bis die LED schnell blinkt und lassen Sie die Taste anschließend wieder los.
3 seconds (LED flashes rapidly and remains on after 3 seconds) and a max. 5 seconds
3 Sek. (LED blinkt schnell und bleibt nach 3 Sek. an) und max. 5 Sek.
Press and hold the Power Button on the right earcup of the headset until the Power LED flashes rapidly.
Drücken und halten Sie die Power-Taste am Headset für 5 Sekunden, bis die Power-LED des Headsets schnell blinkt, dann die Taste sofort loslassen.
Insert a paperclip (or something similar) into the pinhole on the transmitter to press the Pair Button, until the transmitter's Connection Status LED flashes rapidly.
Drücken und halten Sie die PAIR -Taste am Sender für 5 Sekunden bis die LED schnell blinkt, dann die Taste loslassen.
Press and hold the Pair button on the transmitter for five seconds, until the transmitter's Power/Link LED flashes rapidly. Release.
Halten Sie bei ausgeschaltetem XBA die Taste am XBA für 4 Sekunden gedrückt und lassen Sie los, wenn der XBA schnell zu blinken beginnt.
4 Release the Service button and then press it again until the Power LED flashes rapidly.
4 Service-Taste los lassen und erneut drücken bis die Power LED schneller blinkt.
Press and Hold the Connect Button on the Headset until the Headset's Power LED flashes rapidly, indicating that the headset is in Pairing Mode. 3.
Drücken Sie und halten Sie die Connect-Taste am Headset, bis die Power-LED des Headsets schnell blinkt und zeigt an, dass sich das Headset im Pairing-Modus befindet.
Press and hold the "Sub Pairing" button (on the back panel) and plug in the power cable until the red LED flashes rapidly.
Drücken und halten Sie die Taste "Sub Pairing" (Geräterückseite) und stecken Sie jetzt das Stromkabel an.
Insert a paperclip (or something similar) into the pinhole on the transmitter to press the Pair Button, until the transmitter's Connection Status LED flashes rapidly.
Legen Sie eine Büroklammer (oder etwas ähnliches) in das Pinhole auf dem Sender ein, um die Pair-Taste zu drücken, bis die Verbindungsstatus-LED des Senders schnell blinkt.
Find out what to do if your DreamStation Go battery pack LED flashes rapidly.
Finden Sie heraus, welche Modi und Druckbereiche auf der Philips DreamStation Go-Plattform verfügbar sind.
Potentieel gevoelige of ongepaste informatie
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.