Vertaling van "LED stops" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The power bank is fully charged when the fourth LED stops blinking.
Die Powerbank ist voll aufgeladen, wenn die vierte LED nicht mehr blinkt.
Once the yellow LED stops blinking and glows, switch off the ignition.
Sobald die gelbe LED nicht mehr blinkt und stattdessen leuchtet, die Zündung ausschalten.
The yellow LED stops when all processes are killed and the disks are being unmounted.
Die gelbe LED hört auf zu blinken, wenn alle Prozesse beendet sind und nun die Platten unmounted werden.
When the green LED stops flickering, the end of the trimming area has been reached and the servo lever stops.
Wenn die grüne LED aufhört zu flackern, ist das Ende des Trimmbereiches erreicht und der Servohebel bleibt stehen.
When the yellow LED stops blinking then you should still wait 10 seconds before you power off the computer.
Wenn die gelbe LED aufhört zu blinken, dann sollte man noch 10 Sekunden warten, bis man ausschaltet.
The disadvantage of this is that when the LED stops working, you need to replace the entire fixture.
Die Kehrseite der Medaille ist, dass Sie die gesamte Leuchte ersetzen müssen, wenn die LED nicht mehr funktioniert.
If one LED stops flashing and is a solid color then that Port is connected.
Wenn mindestens eine LED aufhört zu blinken und ein Dauerlicht anzeigt, dann ist der Port mit dem Netzwerk verbunden.
As soon as the LED stops flashing, the BIOS has been updated.
Sobald die LED aufhört zu blinken, wurde das BIOS fertig aktualisiert.
The LED stops flashing and the A or B point is saved, and the unit automatically exit from the A/B Move mode.
Die LED hört auf zu blinken, der Aoder B-Punkt wird neu eingestellt und der A/B Move-Modus wird deaktiviert.
When the LED stops flashing and turns into green and the welcome screen is displayed, the Chart Panel is ready to use.
Wenn die LED nicht mehr blinkt und grün aufleuchtet und der Begrüßungsbildschirm angezeigt wird, ist die Sehtafel verwendungsbereit.
Once the LED stops flashing, the Rhythm is ready to be used.
Sobald das LED nicht mehr blinkt, ist das Rhythm-Modul einsatzbereit.