Vertaling van "MBR code" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Shuts down the machine without any warning to boot to MBR code.
Er fährt den Rechner herunter, ohne Vorwarnung, den MBR-Code zu booten.
After the infection, the machine boots to MBR code, which
Nach der Infektion bootet die Maschine zum MBR-Code
Both the MBR code and the signature bytes (if any) remain the same.
Sowohl der MBR-Code als auch die Signatur-Bytes (wenn vorhanden) bleiben so.
By the above operations the MBR code is restored (only if necessary) and a potential boot manager partition is removed.
Durch diese Operationen wird der MBR-Code restauriert (nur sofern notwendig) und eine eventuell vorhandene Bootmanager-Partition wird gelöscht.
One solution is to boot the install media again, drop to the shell and invoke fdisk(8) to update the MBR code from the command line
Eine Lösung ist, das Installationsmedium wieder zu starten, auf die Shell zurückzugreifen und fdisk(8) aufzurufen, um den MBR-Code von der Befehlszeile aus zu aktualisieren
MBR code loads the boot sector referenced by the partition table for the "active primary partition" into memory and transfers CPU execution to the start of that memory address.
MBR-Code lädt den Bootsektor, auf den die Partitionstabelle für die "aktive primäre Partition" verweist, in den Speicher und übergibt die CPU-Ausführung an den Anfang dieser Speicheradresse.
The MBR is manipulated by the fdisk(8) program, which is used both to edit the partition table, and also to install the MBR code on the disk.
Der MBR wird von dem Programm fdisk(8) verändert, welches verwendet wird, um die Partitionstabelle zu editieren und um ebenfalls den MBR-Code auf die Platte zu schreiben.
The MBR code in the current MBR remains unchanged.
Der MBR-Code im aktuellen MBR bleibt unverändert.
It is loaded by the MBR code, and has the task of loading the OpenBSD second-stage boot loader, boot(8).
Er wird vom MBR-Code geladen und hat die Aufgabe, OpenBSDs Secondstage-Bootloader boot(8) zu laden.
Beginning with version 5.7 of TestDisk, new MBR code was created specifically for TestDisk by Neil Turton (the author of mbr-install; version mbr-1.1.8 includes the source code for the TestDisk MBR).
Mit der Version 5,7 von TestDisk beginnend, wurde ein neuer MBR-Code ausdrücklich für TestDisk von Neil Turton erstellt (Autor von mbr-install; Version mbr-1.1.8 schließt den Quellcode für TestDisk MBR ein).
When the boot manager is installed on the MBR the previously saved MBR is read from the second sector of the boot disk 1 (LBA=1), and the MBR code of the current MBR is replaced by the MBR code of the previously saved MBR.
Falls der Bootmanager in den MBR installiert wurde, wird der zuvor gesicherte MBR aus dem zweiten Sektor (LBA=1) der Boot-Platte 1 gelesen. Anschliessend wird der MBR-Code des aktuellen MBR ersetzt durch den MBR-Code aus dem zuvor gesicherten MBR.
For a fully-commented copy of this DOS standard (or 'Classic') MBR code, see
Für eine vollständig kommentierte Kopie dieses DOS-Standards (oder 'klassischen') MBR-Codes, siehe
The TestDisk MBR If you use TestDisk to write its MBR code to the first sector of your hard disk, it will very briefly identify itself by displaying TestDisk on the screen at boot up.
Der TestDisk-MBR Wenn du TestDisk verwendest, um den TestDisk-MBR-Code auf den ersten Sektor deiner Festplatte zu schreiben, identifiziert es sich sehr kurz dadurch, dass es TestDisk auf der Anzeige beim booten anzeigt.