Returns true if a response was received from the server to the ping request.
Gibt TRUE zurück, wenn eine Antwort des Servers auf die Ping-Anforderung empfangen wurde.
The maximum number of milliseconds to wait for the server to respond to the ping request.
Die maximale Anzahl von Millisekunden, die gewartet werden soll, bis der Server auf die Ping-Anforderung antwortet.
The return address of the ping request is actually the address of the attack target.
Die Antwortadresse für die Ping-Anfrage ist die Adresse des Ziels des Angriffs.
It starts a ping request to the host, while a packet size of 1492 bytes is being used.
Es wird eine Ping-Anfrage an den Host gestartet, dabei wird eine Paketgröße von 1492 Byte verwendet.
Port - The port that the application is using in its attempt to establish the network connection (Port 0 is typically used for a ping request).
Anschluß - Der Anschluß, den die Anwendung beim Aufbau einer Netzwerkverbindung verwendet (Üblicherweise wird Anschluß 0 für eine Ping-Abfrage verwendet).
If the ping was unsuccessful, a message will appear stating xx.xx.xx.xx did not respond, where xx.xx.xx.xx is the IP Address that was used in the ping request.
Wenn der Ping nicht erfolgreich war, wird die Meldung xx.xx.xx.xx did not respond (xx.xx.xx.xx reagiert nicht) angezeigt, wobei xx.xx.xx.xx die IP-Adresse ist, die bei der Ping-Abfrage verwendet wurde.
For example, sends a PING request every minute.
When synchronization is complete, the mobile device issues a new PING request and the whole process starts over.
Nachdem der Synchronisierungsvorgang abgeschlossen ist, sendet das mobile Gerät eine neue PING-Anforderung, und das Verfahren beginnt von vorn.
Sends a ping request to the dbmlsync server to check if the server is active and responding to requests.
Sendet eine Ping-Anforderung an den dbmlsync-Server, um zu prüfen, ob der Server aktiv ist und auf Anforderungen antwortet.
When synchronization is complete, the mobile device issues a new ping request and the whole process starts over.
Nach Beendigung des Synchronisierungsvorgangs gibt das Mobiltelefon eine neue PING-Anforderung aus, und das Verfahren beginnt erneut.
Sends a ping request to the dbmlsync server to check if the connection is good and if the server is live and responding to requests.
Sendet eine Ping-Anforderung an den dbmlsync-Server, um zu prüfen, ob die Verbindung gut ist und ob der Server verfügbar ist und auf Anforderungen antwortet.
Ping request could not find host.
Ping-Anforderung konnte Host nicht finden.
Ping request could not find host
Ping-Anforderung konnte Host nicht ermitteln