Performance test: temperature, pressures, air volume and current draw
Performance test - to ensure product meets the published data in accordance with the following standards
Leistungstest - Gewährleistung, dass das Produkt den veröffentlichten Daten in Übereinstimmung mit den folgenden Normen entspricht
Part 3: "Performance test methods for solar water heater stores"
Performance test, material combinations and special projects
"1761004 Performance test was unsuccessful; refer to the displayed data."
"1761004 Leistungstest war ein Misserfolg; siehe angezeigte Daten."
"3681004 Performance test was unsuccessful; check condition messages."
"3681004 Leistungstest war nicht erfolgreich, Zustandsmeldungen überprüfen."
Performance test of 3 modules to reduce the concentration of formaldehyde, toluene, n-dodecane in the air of an emission chamber + re-emission test to verify if the modules release the tested substances.
Leistungstest von 3 Modulen zur Reduzierung der Konzentration von Formaldehyd, Toluol, n-Dodekan in der Luft einer Emissionskammer + Wiederholungsprüfung zur Überprüfung, ob die Module die geprüften Substanzen freisetzen.
Select the Performance test type.
Wählen Sie den Leistungstest aus.
Performance test of air-water heat pumps
Leistungsprüfung an Luft-Wasser-Wärmepumpen (PDF-Flyer)
Performance test in jumping 9.0.
Leistungsprüfung im springen 9,0.
1751004 Performance test completed successfully.
1751004 Leistungstest erfolgreich abgeschlossen.
Performance test methods and the ecological assessment of combined solar thermal and heat pump systems
WPSol - Leistungsprüfung und ökologische Bewertung von kombinierten Solar-Wärmepumpenanlagen
A Performance test based on GB/T 18801-2015, in 3m3 chamber/ cfm is a calculated value.
A Leistungstest basierend auf GB/T 18801-2015, im 3m3-Raum/ CFM ist ein errechneter Wert.