Polyol and isocyanate are the two basics components required for the production of polyurethane.
Die beiden Komponenten Polyol und Isozyanat sind die Basiskomponenten jeder Polyurethan Herstellung.
Polyol, polyurethane resin and utilization thereof.
Polyol, Polyurethanharz und ihre Verwendung.
These additional features of Polyol Y were accomplished by adjusting the waterborne resin composition to efficiently emulsify the hydrophobic crosslinker.
Diese zusätzlichen Vorteile des Polyol Y wurden vervollständigt durch Justierung der wässrigen Polyolmischung für ein effizientes Emulgieren des hydrophoben Vernetzers.
Polyol (provides very good residual elasticity)
Polyol (führt zu einer sehr guten Restelastizität)
Hard Polyol with high reactivity and functionality for decorative floor coatings as well as transparent and pigmented sealers
Hartes Polyol mit hoher Reaktivität und Funktionalität, für dekorative Bodenbeschichtungen sowie transparente und pigmentierte Versiegelungen
As shown in figure 4, the blister free film thickness can even be further increased by means of additional binder composition optimization (Polyol Y).
Wie Abbildung 4 zeigt, kann die BFFT sogar noch durch weitere Optimierung des zusätzlichen Bindemittels (Polyol Y) erhöht werden. Beachtenswert in Abb.
Polyol and rigid polyurethane foam.
Polyol und starrer Polyurethanschaum.
Polyol and utilization thereof.
Polyol und seine Verwendung.
Polyol and isocyanate metering with a hydraulically driven piston for each
Dosierung Polyol und Isocyanat mit je einer Tandem-Kolbeneinheit
This could explain the relative high amount of blisters in the coating based on the market reference resin compared to that of Polyol Y.
Dies könnte den relativ hohen Blasenanteil in der marktüblichen Referenzbeschichtung im Vergleich zu jener auf Basis Polyol Y erklären.
Arcol Polyol HS 100 can also be used for the production of conventional slabstock foams with very high loadbearing properties.
Arcol Polyol 1105 S wird überwiegend zur Herstellung von konventionellen Weichblockschaumstoffen eingesetzt.
Speciality Polyol with extended pot life and workability for application temperature over 40ºC, for medium hard coatings with good chemical resistance.
Spezial Polyol mit besonders langer Verarbeitungszeit auch bei Applikationstemperaturen von über 40º C, für mittelharte Beschichtungen mit guter Chemikalienbeständigkeit.
Arcol Polyol 1105 S is a low VOC (volatile organic compounds), medium molecular weight polyoxypropylene triol.
Arcol Polyol 1105 S ist ein trifunktionelles Polyetherpolyol mittlerer Molmasse vom Polyoxypropylentyp mit sehr geringem Anteil flüchtiger Verbindungen.