Vertaling van "Sh-A" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The standard N21 design is provided with 90 Sh-A hardness.
Im Standard wird das Profil mit einer Härte von 90 Sh-A geliefert.
NR-SBR, smooth/smooth, without reinforcing insert,... approx. 65 Sh-A
NR-SBR, glatt/glatt, ohne Einlage, ca. 65 Sh-A
transparent, glossy, Shore hardness approx. 75 Sh-A
Oberfläche: transparent, glänzend, Shorehärte: ca. 75 Sh-A
Material: two-component polyurethane casting resin, Colour: colourless transparent when cured, Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca.
Material: Zweikomponenten-Polyurethangießharz, Farbe: ausgehärtetes Material farblos transparent, Shore-Härte: weich (ca. 40 - 70 Sh-A), Mischungsverhältnis: Harz zu Härter ca. 1,5-2,5: 1
soft-PVC, transparent, colourless, Shore hardness about 65 Sh-A, with moveable polycarbonate hook or nickel-plated steel hook
PVC-weich, transparent, farblos, Shorehärte ca. 65 Sh-A, mit beweglichem Polycarbonathaken oder vernickeltem Stahlstülphaken
The designation "Sh-A" or, alternatively, "Sh-D" stands for Shore Hardness, which is a scale of hardness for elastomers and plastics.
Die Angabe „Sh-A" bzw. "Sh-D" steht für „Shore-Härte", die den Härtegrad von Elastomeren und Kunststoffen angibt.
The inhibitor solenoid is turned ON, and SH-A pressure (SA) in the PH control valve is released.
Der Sicherheits-Steuermagnet wird eingeschaltet und der SH-A-Druck (SA) im PH-Steuerventil wird abgelassen.
The inhibitor solenoid is turned OFF by the PCM, and SH-A pressure (SA) is applied to the right end of the reverse inhibitor valve.
Der Sicherheits-Steuermagnet wird über das PCM ausgeschaltet und der SH-A-Druck (SA) wird zum rechten Ende des Rückwärtsgang-Sicherheitssperrventils geleitet.
An OFDM mode (SH-A) based on the DVB-T standard with specific enhancements.
Einen OFDM-Modus (SH-A) auf Basis des DVB-T-Standards mit speziellen Optimierungen.
permanently elastic plastic spacer made from polyurethane elastomer, Shore hardness 65-70 Sh-A, temperature resistant from approx.
Material: Kunststoff-Puffer aus Polyurethan-Elastomer, Eigenschaft: dauerelastisch, Shorehärte: 65-70 Sh-A, Temperaturbeständigkeit: (ca.)
All solenoids and sensors are off because of an electronic control system breakdown the inhibitor solenoid is faulty OFF and SH-A pressure (SA) is applied to the right end of the reverse inhibitor valve.
Alle Magneten und Sensoren werden aufgrund eines defekten elektronischen Steuersystems ausgeschaltet, der Sicherheits-Steuermagnet wird fälschlicherweise ausgeschaltet, und der SH-A-Druck (SA) wird zur rechten Seite des Sicherheits-Steuerventls geleitet.