Select an address that you want to assign to a particular BOOTP client.
Wählen Sie eine Adresse, die Sie einem bestimmten BOOTP-Client zuweisen möchten.
The BOOTP client also requests additional information.
Boot image file name. Identifies the generic file name (such as unix) of the requested boot file, based on the BOOTP client hardware type.
Name der den allgemeinen Dateinamen (wie z. B. unix) der angeforderten Startdatei, basierend auf dem Hardwaretyp des BOOTP-Clients, an.
How to Set Up Support of Any BOOTP Client (DHCP Manager)
So richten Sie die Unterstützung für alle BOOTP-Clients ein (DHCP Manager)
The BOOTP client requests an IP address and other relevant information.
Der BOOTP-Client fordert eine IP-Adresse zusammen mit relevanten Informationen an.
Each record in the BOOTP table contains the three fields that contain the information returned to the BOOTP client
Jeder Eintrag der BOOTP-Tabelle enthält drei Felder mit an den BOOTP-Client zurückgesendeten Informationen
Any BOOTP client can now obtain an address from this DHCP server.
Jetzt kann jeder BOOTP-Client eine Adresse von diesem DHCP-Server beziehen.
Another option to the dynamic BOOTP address pool, is to add a client reservation for each non-dynamic BOOTP client within your DHCP scopes.
Eine weitere Option des dynamischen BOOTP-Adressenpools ermöglicht das Hinzufügen einer Clientreservierung zu jedem nichtdynamischen BOOTP-Client innerhalb der DHCP-Bereiche.
The DHCP Server service can later reclaim addresses used in the dynamic BOOTP address pool, after first verifying a specified lease time has elapsed and that each address is not still in use by the BOOTP client.
Nachdem der DHCP-Serverdienst zunächst ermittelt hat, dass die festgelegte Gültigkeitsdauer der Lease überschritten wurde und dass außerdem die Adressen nicht mehr vom BOOTP-Client verwendet werden, kann er die im dynamischen BOOTP-Adressenpool verwendeten Adressen zurückfordern.
67 BootP Client 68 Enter the K2000 network bootstrap file name
67 BootP-Client 68 Geben Sie den Namen der K2000 Netzwerk-Bootstrap-Datei ein
Provides IP address for any BOOTP client on a DHCP-managed network, or on a network connected by a relay agent to a DHCP-managed network.
Stellen Sie jedem BOOTP-Client in einem DHCP-verwalteten Netzwerk oder in einem Netzwerk, das über einen Relay-Agent mit einem DHCP-verwalteten Netzwerk verbunden ist, eine IP-Adresse bereit.
This path information is returned via Trivial File Transfer Protocol (TFTP) to the BOOTP client and is appended by the client to the value in Boot image file name when issuing a fully qualified request to the TFTP server for a bootstrap configuration.
Dieser Pfad wird über TFTP (Trivial File Transfer Protocol) an den BOOTP-Client zurückgegeben und vom Client bei der Ausgabe einer vollständig qualifizierten Anforderung an den TFTP-Server für eine Bootstrapkonfiguration an den Wert in Name der Startimagedatei angehängt.
This file is a collection of entries for each BOOTP client served by this server.