For the first buckling mode, you obtain an effective length factor of kcr, y = 2.92 for the buckling about the major axis.
Für die erste Knickfigur ergibt sich ein Knicklängenbeiwert von kcr, y = 2,92 für das Knicken um die starke Achse.
When calculating the effective lengths of a simple structural system, for the first buckling mode I obtain an effective length Lcr, y that is too great.
Berechnung RSKNICK Bei der Berechnung der Knicklängen eines einfachen Systems erhalte ich für die erste Knickfigur eine zu große Knicklänge Lcr, y.
This capability is useful when the lowest buckling mode is not of interest.
Diese Funktion ist nützlich, wenn der niedrigste Knickmodus nicht von Interesse ist.
The analysis will end once a buckling mode with a load factor larger than the cutoff is calculated.
Die Analyse wird beendet, sobald ein Knickmodus mit einem Lastfaktor größer als der obere Grenzwert berechnet wird.
Since critical buckling is an eigenvalue solution, the displacement results show the buckling mode shape.
Da es sich beim kritischen Knicken um eine Eigenwert-Lösung handelt, stellen die Verformungsergebnisse die Form des Knickmodus dar.
The number of requested buckling modes will start with the first buckling mode with a load factor larger than the lower cutoff.
Die Anzahl der erforderlichen Knickmodi beginnt mit dem ersten Knickmodus mit einem Lastfaktor größer als der untere Grenzwert.
Use buckling analysis to determine if a specified set of loads cause buckling and to find the shape of the buckling mode.
Mithilfe der Knickberechnung können Sie ermitteln, ob bestimmte Lasten ein Ausknicken verursachen, und die Form des Knickmodus bestimmen.
In the second buckling mode, you obtain a higher buckling load (sway about the y-axis), from which you obtain the correct buckling load Lcr, y.
In der zweiten Knickfigur ergibt sich eine höhere Knicklast (Ausweichen um die y-Achse), mit der sich die entsprechende Knicklänge Lcr, y errechnet.
In this case, it is the third buckling mode with a buckling load of 5485.5 kN.
Im Beispiel ist es die dritte Knickfigur mit einer Knicklast von 5485,5 kN.
If you also want to obtain the correct effective length for Lcr, y, you must also look at the second buckling mode.
Möchten Sie für Lcr, y die richtige Knicklänge ablesen, so betrachten Sie die zweite Knickfigur.
Frames with unique global and local imperfection in the shape of the elastic buckling mode (Part 1)
Stabwerke mit einmaliger globaler und lokaler Imperfektion in der Form der elastischen Knickfigur (Teil 1).
FAQ 000220 RU The values for the precamber are not shown because the ordinate of the buckling mode is probably too small so that it cannot be considered by using the specify tolerance.
Die Werte für die Vorkrümmung werden nicht mit ausgegeben, da die Ordinatengröße der Knickfigur wahrscheinlich so gering ist, dass sie mit der eingestellten Toleranz nicht berücksichtigt werden.
In the determination of a buckling mode and buckling lengths, the load plays an important role: Buckling values depend not only on the structural model, but also on the relation of normal forces to the total critical buckling load Ncr.
Bei der Berechnung der Knickfigur und somit der Knicklängen spielt die Belastung eine entscheidende Rolle: Die Knickwerte hängen nicht nur vom statischen Modell, sondern auch vom Verhältnis der Normalkräfte zur Gesamtverzweigungslast Ncr ab.