Vertaling van "button load" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Here you "click" now on the button Load in the lower bar and open the downloaded setting.
Hier "klickt" man nun den Button Laden in der unteren Leiste an und öffnet das heruntergeladenen Setting.
To load the correct mixer table, the button Load can be clicked and the right. mkm file can be opened.
Um die richtige Mixertabelle zu laden, kann auf den Button Laden geklickt und die passende.mkm Datei geöffnet werden.
Alternatively, the profile can be opened and extracted using the button Load.
Alternativ kann das entsprechende Profil über die Schaltfläche Laden ausgewählt und geladen werden.
By clicking the button Load the parameterset can be re-used in the configuration.
Durch Klicken der Schaltfläche Laden werden die Auslegungsdaten übernommen und können so wiederverwendet werden.
Click on the button Load predefined template.
Click on the button Load predefined template and then on the command Article Number Search.
Klicken Sie auf die Schaltfläche Load predefined template und dann auf den Befehl Artikelnummernsuche.
Once the filter elements are selected, the selection lists may be filled clicking the button Load.
Nach Auswahl der Filterelemente füllt man beide Auswahllisten durch Betätigung der Schaltfläche Laden.
Below click the button Load...
Alternatively, the profile can be opened and extracted using the button Load... If that does not work the corresponding profile does not contain any measurement data.
Alternativ kann das entsprechende Profil über die Schaltfläche Laden... ausgewählt und geladen werden. Wenn das nicht gelingt beinhaltet das entsprechende Profil keine Messdaten.
Clicking on the button Load fills the search mask with the selected query.
Mit Klick auf die Schaltfläche Laden wird dieser in die Suchmaske geladen.
Via the button Load you can open the setting MK-Easy
Über den Button Laden das Setting MK-Easy auswählen und Öffnen
Start the MikroKopter-Tool and open the Settings Via the button Load you can open the setting MK-Easy
Hier "klickt" man nun den Button Laden in der unteren Leiste an und öffnet das heruntergeladenen Setting.
In the tab Upload click the button load file and select a hex file with the application firmware.
Im Tab Upload den Button load file klicken und eine Hex-Datei mit der neuen Controller-Software auswählen.