Vertaling van "can4linux" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The can4vxworks driver is a result of the can4linux project which was developed in 1997 to control laboratory devices that use CAN.
Das can4vxworks ist aus dem can4linux Projekt entstanden, welches 1997 zur Steuerung von Laborgeräten unter CAN entwickelt wurde.
A list of supported CAN controllers is available on the can4linux project site.
Eine Liste befindet sich auf der can4linux Projekt Seite.
It is furthermore possible to use different real-time operating systems (RTOS)as well as Linux (SocketCAN, can4linux), Windows and QNX.
Die Verwendung verschiedener Echtzeitbetriebssysteme (RTOS) sowie Linux (SocketCAN, can4linux), Windows und QNX ist möglich.
The universal can4linux CAN device driver was developed to accomplish this.
Thanks to many adaptations made we find can4linux based CAN/ CANopen applications not only on Intel platforms with an SJA1000 CAN controller, but also in devices with Freescale, Atmel, and Analog Devices processors.
Dank der vielfältigen Anpassungen des can4linux findet man CAN/CANopen-Anwendungen nicht nur auf Intel Plattformen mit einem SJA1000 CAN Controller, sondern auch in Geräten mit Freescale, Atmel und Analog Devices Prozessoren.
Derived from this driver is the new can4linux version line 2.x and follow-up.
A Wiki with extensive informations to CAN, usable controllers, products, higher level protocols and also external links. can4linux
Ein Wiki mit vielen Informationen über CAN, einsetzbare Controller, Produkte, Protokolle auf höheren Schichten und natürlich weiterführenden Links
The PCI boards PCIL manufacturered by JANZ AG equipped with one or two CAN controllers can now be used with the can4linux device driver under the Linux operating system...
Die PCI Karten von Janz, mit einem oder zwei CAN Controllern, werden jetzt auch vom can4linux Projekt unterstützt...
can4linux Version 3.5.7 released With finishing the work on can4linux for the two FlexCAN modules on the Ka-Ro TX25 board the version 3.5.7 with support for the Freescale i.MX25 was released.
Mit Fertigstellung der Anpassung an die beiden FlexCAN Module auf dem TX25 Board der Firma Ka-Ro, wurde can4linux in der Version 3.5.7 mit Support für den Freescale i.MX25 freigegeben.