All other components will be moving with respect to the Engine Block Bottom.
Die anderen Komponenten bewegen sich in bezug auf den Motorblock.
Therefore, we need to assemble the Engine Block Bottom with fixed constraints.
Dazu müssen Sie den Motorblock mit Einbaubedingungen versehen.
Notice how in Figure 4, the connecting rod has assembled pointing down into the Engine Block Bottom.
In Abbildung 4 ist zu sehen, dass die Kolbenstange so eingebaut wurde, dass sie nach unten zum Motorblock zeigt.
Therefore a pin joint is needed between the Crank Shaft and the Engine Block Bottom.
Dazu müssen Sie ein Drehgelenk zwischen Kurbelwelle und Motorblock einbauen.
To do this, a cylinder joint needs to be defined between the Piston Head and Ground which is the Engine Block Bottom in this model.
Dazu müssen Sie ein Zylinderlager zwischen Kolbenkopf und Basis definieren. In diesem Fall ist die Basis der Motorblock.
Select the appropriate axes on the Engine Block Bottom and the Piston Head.
Wählen Sie die entsprechenden Achsen für den Motorblock und den Kolbenkopf.
Engine Block Bottom, Crank Shaft, Piston Connecting Rod, Connecting Rod Clamp, and the Piston Head.
Motorblock, Kurbelwelle, Kolbenstange, Pleuel und Kolbenkopf.
The Crank Shaft will assemble to the Engine Block Bottom and will be spinning about its axis with respect to the Engine Block Bottom.
Montieren Sie die Kurbelwelle auf der Basis des Motorblocks. Die Kurbelwelle dreht sich um ihre Achse in bezug zum Motorblock.