Vertaling van "feed process" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Monitoring the roundness means that tubes that have been compressed during packaging or the feed process are not filled, thus preventing the associated stoppages.
Durch die Rundheitskontrolle werden Tuben, die schon in der Umverpackung oder beim Zuführprozess eingedrückt wurden, nicht befüllt und die Stillstandszeiten so vermieden.
The automatic feed process provides time for valuable other activities.
The feed process during drilling is often pneumatic.
Der Vorschub beim Bohren erfolgt oftmals pneumatisch.
In particular, the metal feed process and nozzle design are to be improved.
The rollers run along the sheet and do not have to be opened for the feed process.
Die Rollen laufen auf dem Blech und brauchen für den Vorschub nicht geöffnet zu werden.
When there is no more charging material in the upper shaft area, the feed process starts automatically.
Browser does not used to clean metal plates and profiles in a continuous through feed process.
Rollbahn-Strahlanlagen werden vorwiegend eingesetzt, um Bleche und Profile im kontinuierlichen Durchlauf zu reinigen.
This is about 35 per cent of the corn, the remaining 65 per cent is returned to the feed process.
Das sind etwa 35 Prozent des Mais, die restlichen 65 Prozent werden in den Futterprozess zurückgeführt.
The crushing tool (53, 55) is set in a first and, where appropriate, with at least one other feed process.
Das Verdrückwerkzeug (53, 55) wird mit einem ersten und gegebenenfalls mit mindestens einem weiteren Zustellvorgang zugestellt.
Reliable feed process for heavy workpieces
Using thin film degassing, any trace of dissolved air in the potting medium can be removed as early as during the material preparation and feed process.
Mittels Dünnschichtentgasung lässt sich bereits bei der Materialaufbereitung und -förderung jede Spur von gelöster Luft im Vergussmedium entfernen.
With medium and short feed distances, the wire feed process can be operated with just one drive (front drive).
Bei mittleren und kurzen Förderstrecken kann der Prozess mit nur einem Antrieb (Front-Drive) betrieben werden.
Under a large variety of feed processing conditions, the feed industry can benefit from on-site support to assist them with feed process monitoring and sampling.
Angesichts der sehr unterschiedlichen Bedingungen bei der Futtermittelverarbeitung profitiert die Futtermittelindustrie von einer Unterstützung vor Ort bei der Überwachung und Probenahme im Zusammenhang mit der Futtermittelherstellung.