Vertaling van "hwclock" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Btw: why are there two hwclock init scripts?
Übrigens: Wozu gibt es zwei hwclock init-Skripte?
By running sudo chmod -x/sbin/hwclock you disable the startup scripts as they check the executable bit on hwclock.
Mit sudo chmod -x/sbin/hwclock deaktivieren Sie die Startskripte, da diese das Ausführbarkeits-Bit in hwclock überprüfen.
State directory for hwclock (optional).
Zustandsverzeichnis für Hwclock (optional).
Otherwise, hwclock will try to use the/dev/rtc device it assumes to be driven by the rtc device driver.
Andernfalls wird hwclock versuchen, das Gerät/dev/rtc zu verwenden und nimmt dabei an, das der rtc-Gerätetreiber verwendet wird.
tc-config: use full path for hwclock, from Misalf
tc-config: Verwenden Sie den vollständigen Pfad für hwclock, von Misalf
USEDIRECTISA: If set to "yes" it tells hwclock to use explicit I/O instructions to access the hardware clock.
USEDIRECTISA: Wenn diese Option auf "yes" gesetzt wird, weist sie hwclock an, explizite I/O Anweisungen zu verwenden, um die Hardware-Uhr zu erreichen.
Again I have no idea what would happen to the booting of the EeePC. I have not made this change (yet). hwclock
Wieder habe ich keine Ahnung was mit dem Bootvorgang des EeePC passieren würde, da ich diese Änderung (noch) nicht durchgeführt habe. hwclock
RTC functionality RTCs can be read and written with hwclock(8), or directly with the ioctl requests listed below.
RTC-Funktionen RTCs können direkt mit den im Folgenden aufgeführten ioctl-Aufrufen und mittels hwclock(8) gelesen und geschrieben werden.
If you expect to run your 1.3 system through the millennium, you can get a copy of the hwclock program from 2.0 and replace the clock program presently on your system.
Falls Sie davon ausgehen, Ihr 1.3-System in das neue Jahrtausend hinein zu betreiben, können Sie eine Kopie des hwclock-Programms von 2.0 erhalten und das momentan in Ihrem System vorhandene clock-Programm ersetzen.
If it is a brand new board, be sure to SET<date/time>to start the hwclock or networking and other things will not function.
Wenn es eine brandneue Karte ist, starten Sie unbedingt mit SET<Datum/Zeit>die Hardware-Uhr, oder das Netzwerk und andere Dinge werden nicht funktionieren.