Vertaling van "sensor check" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
For our devices we use the phosphorus pentoxide method with a patented, automatic sensor check, which checks the accuracy of the sensor during the ongoing process.
Für unsere Geräte setzen wir das Phosphorpentoxid Verfahren mit einem patentierten, automatischen Sensorcheck ein, der die Genauigkeit des Sensors während des laufenden Prozesses überprüft.
DL-inputs would check both thresholds (lead break and short circuit) despite sensor check being to "OFF" and unit being set to "Automatic".
Bei DL-Eingängen wurde die Unterbrechnugs- und Kurzschluss- Schwelle auch überprüft wenn der Sensorcheck auf "AUS" und die Messgröße auf "Automatisch" eingestellt war.
With a sensor check the reachability of sensors can be tested.
Mit dem Sensor-Check kann die Erreichbarkeit der Sensoren geprüft werden.
Its sensor check gives signal for proper sensor connection.
Brushless motor sensor port: for sensor check and rpm measurement
Brushless Motor-Sensor-Anschluss: Für Sensor-Check und Drehzahl-Messung
Safe operation by sensor check function for glass breakage detection
flow-through adapter for sensor check and calibration
Do the yaw rete sensor check.
High operational safety (sensor check function)
The static sensor check may verify that a sensor was not functioning the last time that the vehicle was at a speed greater than 10 km/h (4).
Die statische Prüfung des Sensors darf nachweisen, daß ein Sensor nicht funktioniert hat, als das Fahrzeug zum letzten Mal eine Geschwindigkeit von mehr als 10 km/h erreicht hat (4).
15 cross AF points in the dedicated phase-detection sensor check precise focus and depth.
When it is connected to the instrument, the user can perform a full tire and TPMS sensor check as part of routine maintenance.
Wird er an das Gerät angeschlossen, kann der Nutzer eine vollständige Reifen- und RDKS-Sensorprüfung als Teil der Routinewartung durchführen.
Carry out sensor check to measuring channel A resp. B in the unit set up/adaptor. (Select the measuring channel and press the start button).
Im Geräte-Setup/-Aufnehmer bitte Sensor Check auf Messkanal A bzw B durchführen (wählen Sie den Messkanal und drücken Sie „Start").