Vertaling van "set the tool" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
If this switching is undesirable, set the tool to HIGH or LOW speed manually.
Wenn dieses Umschalten unerwünscht ist, stellen Sie das Werkzeug manuell auf die Geschwindigkeit HIGH oder LOW ein.
Set the tool to Local or Global mode.
Stellen Sie das Werkzeug auf den lokalen oder globalen Modus ein.
Use the slider on the right to set the tool turn in cut.
Mit dem Schieber rechts stellen Sie die Werkzeugdrehung im Eingriff ein.
Enough manually set the tool within 3-4º and he will do the rest.
Genug Werkzeug manuell zu installieren innerhalb von 3-4º, und er erledigt den Rest.
Rotate the turret to one of the cutting tools for which you have set the tool offset.
Drehen Sie den Revolver auf ein Schneidwerkzeug, für das Sie den Werkzeugversatz eingestellt haben.
The button lets you set the tool's parameters at the same values as used for the photo-to-painting conversion.
Mit der Schaltfläche können Sie dieselben Parameter des Werkzeugs benutzen, die bei der Konvertierung verwendet wurden.
All you need to do is enter an angle and the width of the bevel and set the tool path.
Alles, was Sie tun müssen, ist einen Winkel und die Breite der Fase einzugeben und den Werkzeugpfad festzulegen.
A 45º inclination on the shaft and a transverse pin in the intake fixture allows you to accurately set the tool for operation in just a few seconds.
Durch eine 45º Schräge am Schaft und einen Querstift in der Aufnahme haben Sie das Werkzeug in ein paar Sekunden exakt einsatzbereit eingestellt.
Full control with editing of a tool axis - possibility to set the tool axis in a way as to adapt it to the individual areas of a toolpath.
Volle Kontrolle beim Bearbeiten einer Werkzeugachse - Die Werkzeugachse kann so eingestellt werden, dass sie sich an die einzelnen Bereiche einer Werkzeugbahn anpasst.
You can set the tool up so you only receive updates about negative comments and only receive updates if volumes significantly increase.
Sie können das Tool so einrichten, dass Sie nur Benachrichtigungen zu negativen Kommentaren erhalten, oder nur dann, wenn die Anzahl der Kommentare plötzlich steigt.
You can also set the tool to close all open-ended freehand splines automatically.
Ferner können Sie in den Einstellungen das automatische Schließen von Freihand-Splines festlegen.
In the options bar, set the tool options, and specify a brush.
Legen Sie in der Optionsleiste die Werkzeugoptionen fest und geben Sie einen Pinsel an.
Tip: To dodge or burn an area gradually, set the tool to a low exposure value and drag several times over the area you want to correct.
Tipp: Zum allmählichen Abwedeln oder Nachbelichten eines Bereichs geben Sie für das Werkzeug einen niedrigen Belichtungswert an und ziehen es dann mehrmals über den zu korrigierenden Bereich.