Vertaling van "the WPS LED" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
During this process, the WPS LED will blink.
Während diesem Prozess blinkt die WPS-LED-Anzeige.
By default, the WPS LED lights solid green when the power is on.
Wenn der Moderouter eine Verbindung zum Internet hergestellt hat, leuchtet die Internet-LED grün.
To use WPS function, please push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at least 10 seconds.
Um die WPS-Funktion zu verwenden, drücken Sie bitte die Taste für weniger als 5 Sekunden, und dann blinkt die WPS-LED. Um den Router zurückzusetzen, drücken Sie die Taste mindestens 10 Sekunden lang.
If the WPS authentication is successful, the WPS LED will bun steady to indicate a successful connection.
Wenn die Authentifizierung erfolgreich war, leuchtet die WPS-LED dauerhaft, um anzuzeigen, dass eine Verbindung hergestellt wurde.
Either click the WPS button, or press the button on the front of the WPS LED on the front of the gateway begins to blink. The gateway tries to communicate with the wireless computer or device for 2 minutes.
Mit dieser Taste können Sie ein Wireless-Gerät oder einen Computer über WPS in das Netzwerk einbinden. Die LED unter der WPS-Taste blinkt grün, wenn der Router versucht, das Wireless-Gerät oder den Computer hinzuzufügen.
When the WPS mode is activated the WPS LED blinks as it awaits a connection.
Wenn die WLAN-LED leuchtet, ist das WLAN aktiviert.
Follow the steps below to activate and establish a WPS connection with the Push Button technology: C. Press the WPS button on the back of the modem router, the WPS LED will start to flash indicating that WPS authentication has started.
Führen Sie die folgenden Schritte für die Aktivierung und Einrichtung einer WPS-Verbindung mit der Knopfdruck-Methode aus: A. Drücken Sie den WPS-Knopf auf der Hinterseite des C150APRA2; daraufhin beginnt die WPS-LEDAnzeige zu blinken, was bedeutet, dass die WPS-Authentifizierung gestartet wurde.
If the authentication of the Wireless Client is succeeded, the WPS LED will burn steady blue for 5 minutes.
Wenn die Authentifizierung erfolgreich war, leuchtet die WPS-LED dauerhaft, um anzuzeigen, dass eine Verbindung hergestellt wurde.
If you turned off the WiFi radios, the WiFi On/Off LED and the WPS LED turn off.
Wenn das passiert, leuchtet die WLAN-LED konstant, und der WPS-Bildschirm des Routers zeigt eine Bestätigungsmeldung an.
If successful, the WPS LED on your Extender turns solid green, the 2.4 GHz Link Rate LED lights up, and the Extender should be connected to your existing Wi-Fi network.
Wenn dies erfolgreich ist, leuchtet die WPS-LED auf Ihrem Repeater grün, die 2,4 GHz-Übertragungsrate-LED leuchtet auf, und der Repeater sollte eine Verbindung mit Ihrem bestehenden WLAN-Netzwerk herstellen.
If successful, the WPS LED on your Extender turns solid green, the 2.4 GHz Link Rate LED lights up, and the Extender should be connected to your existing Wi-Fi network.
Die WPS-LED auf dem Repeater leuchtet grün, die LED für die Routerverbindung leuchtet auf, und der Repeater ist mit Ihrem bestehenden WLAN-Netzwerk verbunden.
On the PLW400, press and hold the Wi-Fi Protected Setup button at least one (1) second, until the WPS LED flashes.
Halten Sie am PLW400 die Taste Wi-Fi Protected Setupfür mindestens eine (1) Sekunde gedrückt, bis die WPS LED-Anzeige aufblinkt.
Wi-Fi Protected Setup LED - Take note of the following activities for the WPS LED
Wi-Fi Protected Setup LED: Die WPS-LED weist auf folgende Aktivitäten hin