The threaded bolt can still be rotated easily after the test.
For mounting, the threaded bolt is screwed into a prepared tapped hole.
Zur Montage wird der Gewindebolzen in eine vorbereitete Gewindebohrung geschraubt.
Once the foundations of hardened, the threaded bolt should be removed.
Nach Aushärten des Fundamentes sollte die Gewindestange entfernt werden.
Large figures are also fixed with a threaded bolt through the rafter or the timber purlin.
Große Figuren werden zusätzlich mit einer Gewindestange durch den Sparren oder die Holzpfette verschraubt.
The bearing of the threaded bolt must not suffer any measurable changes.
Die Lagerung des Gewindebolzens darf keine messbaren Veränderungen erleiden.
Simply use the long threaded bolt from the set.
Dazu einfach den langen Gewindebolzen aus dem Set verwenden.
Attached with the threaded bolt in the base.
Die Montage erfolgt durch den Gewindebolzen im Sockel.
Screw the nut onto the threaded bolt.
Schrauben Sie die Mutter auf den Gewindebolzen.
Put the strain relief on the threaded bolt.
Stecken Sie die Kabelzugentlastung auf den Gewindebolzen.
This two part assembly will simulate the connection between a threaded bolt and nut.
Diese zweiteilige Baugruppe stellt eine Verbindung eines Gewindebolzens und einer Mutter dar.
Anchorage of a threaded bolt by means of a composite substance.
For repairing the threaded bolt in the wheel bearing housing.
Zur Reparatur der Gewindebolzen im Radlagergehäuse.
Plug the toggle nut onto the threaded bolt at an oblique angle.
Die Knebelmutter wird schräg auf den Gewindebolzen aufgesteckt.