Vertaling van "LEDs flash" in Frans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
If the batteries are empty, all the LEDs flash for an hour.
Lorsque les piles sont déchargées, toutes les LED clignotent pendant une heure.
In case of incompatibility, all LEDs flash quickly for 3 times.
2 LEDs flash blue, at the same time
The red and green LEDs flash once alternately every 2s, and the buzzer doesn't buzz.
Les LEDs clignotent de façon alternative toutes les 2s, le buzzer ne retentit pas.
My LEDs flash and/ or turn off after a few seconds.
Wait 45 seconds or from the moment that the LEDs flash red, a new synchronization can be started.
Attendez 45 secondes ou jusqu'au moment où les LEDs clignotent en rouge, une nouvelle synchronisation peut être démarré.
When the session time has elapsed, the LEDs flash 3 times to warn you.
Lorsque le temps de séance est écoulé, les LED clignotent 3 fois pour vous en avertir.
When the program stops, the LEDs flash in blue, if you are connected to your smartphone, or in green, if you use your device manually.
Quand le soin est terminé, les LED clignotent à nouveau en bleu, si vous êtes connectés à votre smartphone, ou en vert, si vous utilisez l'appareil en manuel.
3rd push of switch: all 9 LEDs flash at the same time in slow mode
3ème bouton de l'interrupteur: les 9 LED clignotent en même temps en mode lent
2 LEDs flash red, then orange, then green
2 LEDs clignotent en rouge, puis orange, puis vert
Users can monitor ink levels during stand-alone use as the LEDs flash slowly to warn when the tank runs low, and more rapidly to indicate when the cartridge is empty.
L'utilisateur peut également vérifier le niveau d'encre pendant l'utilisation de l'imprimante de manière autonome, sans écran d'ordinateur : les LED clignotent lentement lorsque le niveau d'encre devient faible, et plus rapidement lorsque le réservoir est vide.
There will be an LED indication when you are in the cumulative alarm region (both LEDs flash) but an alarm will not be triggered until the specified amount of time has been exceeded (or matched).
Il y aura une indication LED lorsqu'on est dans la zone d'alarme cumulative (les deux LED clignotent), mais aucune alarme ne sera déclenchée tant que la durée spécifiée n'aura pas été dépassée.
Once programmed, you simply need to press on the START button for a few seconds until all the LEDs flash; the logger is now set.
Une fois programmé, il ne vous reste plus qu'à appuyer sur le bouton START quelques secondes jusqu'à ce que toutes les leds clignotent : l'enregistreur est alors déclenché.