The buckling load and fundamental natural frequency of a substructure subjected to the cited effects are also assessed.
La charge de flambage et la fréquence normale fondamentale de la sous-structure soumise aux effets cités sont également évaluées.
We have also found that the buckling load and the associated mode depend on the contact configuration, in particular the flexural rigidity of the confinement.
Nous avons aussi constaté que la charge de flambage et le mode associé dépendent de la configuration de contact, notamment de la rigidité à la flexion du confinement.
Additionally, you can specify user-defined loads, for example concentrated loads from columns (buckling load).
En complément, vous pouvez spécifier les charges définies par l'utilisateur, par exemple les charges concentrées des poteaux (charge de flambement).
The member which proves the smallest buckling load Ncr can be considered as the governing single member for a continuous member.
La barre dont la charge de flambement Ncr est la plus basse peut être considérée comme la barre individuelle déterminante pour une barre continue.
Shaft centerline and shell supporting surface should ensure that the vertical axis tilt, are not allowed to happen, or it will and buckling load distribution non-uniform cause because of bearing premature failure.
La ligne médiane de l'arbre et la surface de support de la coquille doivent s'assurer que l'inclinaison de l'axe vertical ne doit pas se produire, sinon la distribution de la charge de flambage sera non uniforme en raison de la défaillance prématurée du roulement.
in the functional shape, the flexible compression member has a greater geometrical moment of inertia and is supported by the skin that is under pressure whereby considerably increasing the buckling load of the compression member
dans sa forme fonctionnelle, la barre de compression élastique en flexion présente d'une part un couple surfacique d'inertie supérieur et est d'autre part soutenu par l'enveloppe sous pression, ce qui augmente considérablement la charge de flambage de la barre de compression
The function of the SMA spring is to resist the bulging of the cylinder under large compressive loading, thereby increasing a buckling load that the cylindrical energy absorbing material can accommodate.
La fonction du ressort en AMF est de résister au gonflement du cylindre sous l'action d'une charge de compression importante, ce qui augmente la charge de flambage pouvant être supportée par le matériau cylindrique absorbant l'énergie.
The cr coefficient is determined by dividing the elastic critical buckling load for a global instability mode, Fcr, by the design loading on the structure, FEd.
Le coefficient cr est déterminé en divisant la charge de flambement critique élastique pour un mode d'instabilité globale, Fcr, par la charge de dimensionnement de la structure, FEd.
The elastic critical buckling load Ncr must also be taken into consideration.
La charge de flambement élastique critique Ncr doit également être considéré.
During the verification according to 6.3.4 a resolver for eigenvalues implemented in RF-STEEL EC3 determines the factor cr, op, by which the smallest ideal critical buckling load can be reached with deformations from the structural system plane.
Pendant la vérification selon 6.3.4, un solveur de valeurs propres ajouté à RF-STEEL EC3 détermine le facteur cr, op à partir duquel la charge de flambement critique peut être atteinte avec les déformations à partir du plan du système structurel.
Buckling of bars Determination of the buckling load: influence of material, support, and shear force
Détermination de la charge de flambement: influence du matériau, du type d'appui et de l'effort tranchant
HIGH-PRESSURE INJECTOR FOR INTERNAL COMBUSTION ENGINES HAVING A CONTROL-ROD SUPPORT WHICH INCREASES THE BUCKLING LOAD VIA HIGHLY PRESSURIZED FUEL
INJECTEUR HAUTE PRESSION POUR MOTEURS À COMBUSTION INTERNE À APPUI DE TIGE DE COMMANDE À CHARGE DE FLAMBAGE CROISSANTE PAR L'INTERMÉDIAIRE DE CARBURANT HAUTE PRESSION
The method is tested for computing the buckling load of the compressed plate.
On applique la méthode à l'exemple d'une plaque carrée sous compression.