If you have an old IDE drive it should be good enough.
Un vieux disque IDE devrait faire l'affaire.
Again, try it first without the parameters and see if the IDE drive is recognized properly.
Encore une fois, essayez d'abord sans paramètre supplémentaire pour voir si votre disque IDE est reconnu correctement.
If you are installing an IDE drive, configure the drive for the cable select setting.
Si vous installez un lecteur IDE, configurez-le pour la sélection de câble.
When you disable the write caching of the IDE drive, the mechanical performance can become a factor.
Lorsque vous désactivez l'écriture de la mise en cache du lecteur IDE les performances mécaniques peuvent avoir des répercussions.
To really cause a confusion, (hd1,2) could refer to the first SCSI drive if you only have one IDE drive, or it could refer to the second IDE drive.
De plus, (hd1,2) pourrait désigner le premier périphérique SCSI si vous n'avez qu'un seul périphérique IDE, ou cela pourrait aussi désigner le second périphérique IDE.
This example would make the proper device nodes for the second IDE drive when installed.
Cet exemple devrait créer les fichiers spéciaux de périphérique corrects pour le second disque IDE quand il est installé.
When removing an IDE drive data cable, grasp the colored pull tab and pull until the connector detaches.
Lorsque vous retirez le câble de données d'un lecteur IDE, saisissez le bouton d'extraction de couleur et tirez jusqu'à ce que le connecteur soit libéré.
Linux limits the partitions per drive to 15 partitions for SCSI disks (3 usable primary partitions, 12 logical partitions), and 63 partitions on an IDE drive (3 usable primary partitions, 60 logical partitions).
Linux limite le nombre de partitions à 15 par disque SCSI (3 partitions primaires utilisables et 12 partitions logiques dans la partition étendue) et à 63 par disque IDE (3 partitions primaires et 60 partitions logiques).
Disclaimer NOTE: I have no idea if the IDE drive works the same way as the printer port version does since I don't have one, so please don't ask me.
NOTE : Je n'ai aucune idée si le lecteur IDE fonctionne de la même manière que la version sur port parallèle, puisque je n'en ai pas, donc merci de ne pas me le demander.
To rip from an IDE drive, specify the device name in place of the SCSI unit numbers.
Pour faire l'extraction à partir d'un lecteur IDE, précisez le nom du périphérique à la place de l'unité SCSI.
If you are installing a IDE drive, connect the end of the IDE cable into the IDE interface connector on the back of the drive as follows
Si vous installez un lecteur IDE, procédez comme suit pour brancher l'extrémité du câble IDE au connecteur d'interface IDE à l'arrière du lecteur
When using the old device framework, then the first IDE drive is/dev/hda.
Avec l'ancienne structure, le premier disque IDE est étiqueté /dev/hda.
If you have an IDE drive, configure it to "slave" mode before connecting it to the IDE ribbon.
Si vous avez un lecteur IDE, configurez-le en mode « Esclave » avant de le connecter à la nappe IDE.