Vertaling van "ip ospf" in Frans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
This is an expected behavior if ip ospf network point-to-multipoint is configured.
Ceci est un comportement prévu si ip ospf network point-to-multipoint est configurée.
You can use the command ip ospf retransmit-interval to set the retransmit interval.
Vous pouvez utiliser la commande ip ospf retransmit-interval pour configurer un intervalle de retransmission.
Issue the debug ip ospf adj command in order to capture the authentication process.
Émettez la commande debug ip ospf adj afin de capturer le processus d'authentification.
The most common reason for this delay is that you have the ip ospf name-lookup configuration command configured on the router.
La raison la plus fréquente de ce retard est que vous avez la commande ip ospf name-lookup configuration configurée sur le routeur.
This is the output of the debug ip ospf adj command when there is a mismatch in the type of authentication configured on the routers.
Voici la sortie de la commande debug ip ospf adj lorsqu'il y a une erreur de correspondance dans le type d'authentification configuré sur les routeurs.
You can also use the ip ospf authentication command under the interface to configure plain text authentication for the interface.
Vous pouvez également utiliser la commande ip ospf authentication sous l'interface afin de configurer l'authentification en texte brut pour l'interface.
Use the show ip ospf interface command to view the authentication type configured for an interface, as this output shows.
Utilisez la commande show ip ospf interface pour afficher le type d'authentification configuré pour une interface, comme le montre l'exemple suivant.
Setting the ospf priority on an interface is done using the ip ospf priority <value> interface command.
La définition de la priorité ospf sur une interface est effectuée à l'aide de la commande d'interface ip ospf priority <value>.
To configure simple password authentication for an area, use the command ip ospf authentication-key to assign a password of up to eight octets to each interface attached to the area.
Pour configurer une authentification par simple mot de passe pour une zone, utilisez la commande ip ospf authentication-key pour affecter un mot de passe de jusqu'à huit octets à chaque interface attachée à la zone.
If you want to enable authentication on some interfaces only, or if you want different authentication methods on different interfaces that belong to the same area, use the ip ospf authentication interface mode command.
Si vous voulez activer l'authentification sur quelques interfaces seulement, ou si vous voulez différentes méthodes d'authentification sur différentes interfaces qui appartiennent à la même zone, utilisez la commande de mode d'interface ip ospf authentication.
This is the output of the debug ip ospf adj command when there is a mismatch in the authentication key (password) values.
Voici la sortie de la commande debug ip ospf adj lorsque la valeur des clés d'authentification (mots de passe) ne correspond pas.
To find the router-id, use the show ip ospf interface command.
Pour trouver l'ID de routeur, utilisez la commande show ip ospf interface.
This is the output of the debug ip ospf adj command when there is a mismatch in the key IDs that are used for authentication.
Voici la sortie de la commande debug ip ospf adj lorsqu'il y a une erreur de correspondance dans les ID de clé utilisés pour l'authentification.