The ldm command issues an error if an invalid value is specified.
La commande ldm renvoie une erreur si une valeur non valide est spécifiée.
The ldm list -o resmgmt command shows the constraints.
La commande ldm list -o resmgmt affiche les contraintes.
The ldm cancel-operation command should be initiated from the source system.
La commande ldm cancel-operation doit être lancée à partir de la machine source.
The primary domain is restarted automatically by the ldm init-system command.
Le domaine primary est redémarré automatiquement par la commande ldm init-system.
Look at syntax usage for all ldm subcommands.
Regardez l'utilisation de la syntaxe de toutes les sous-commandes ldm.
All the events correspond to ldm subcommands.
Tous les événements correspondent aux sous-commandes ldm.
It must be explicitly enabled by using the ldm command.
Il doit être activé de manière explicite à l'aide de la commande ldm.
An ldm stop-domain command can time out before the domain completes shutting down.
Le délai d'une commande ldm stop-domain peut être dépassé avant que le domaine ne termine l'arrêt.
A migration operation can also be canceled externally by using the ldm cancel-operation command.
Une opération de migration peut également être annulée à l'aide de la commande ldm cancel-operation.
The ldm process waits for a signal from the ldmd that the migration has been completed before returning.
Le processus ldm attend un signal de ldmd indiquant que la migration est terminée avant de reprendre.
The ldm list-config command lists the logical domain configurations that are stored on the service processor.
La commande ldm list-config répertorie les configurations de domaine logique qui sont stockées sur le processeur de service.
Create a virtual network device by specifying linkprop=phys-state when running the ldm add-vnet command.
Créez un périphérique réseau virtuel en indiquantlinkprop=phys-state lors de l'exécution de la commande ldm add-vnet.
An active domain must be stopped before you use the ldm add-io command to assign a virtual function to it.
Vous devez arrêter un domaine actif avant de lui affecter une fonction virtuelle à l'aide de la commande ldm add-io.