The value of the ILS reference datum height (ILS RDH)
Andere resultaten
Insert both lower and upper height limits of activities or restrictions, clearly indicating only one reference datum and unit of measurement.
Indiquer les limites inférieure et supérieure de hauteur des activités ou restrictions en précisant seulement un niveau de référence et une unité de mesure.
Every precaution shall be taken to ensure that both the position of the reference datum in relation to the tank and the total reference height H, are virtually invariable.
Toutes dispositions sont prises pour que la position du siège de référence par rapport à la citerne et que la hauteur totale témoin H soient pratiquement invariables.
an open-topped housing provided on the rotary adjuster and having an upper surface which defines a height adjustment reference datum level
un logement ouvert sur le haut prévu sur le régleur rotatif et qui possède une surface supérieure qui définit un niveau de référence de réglage de hauteur
the displacement of the stylus from a given position on the surface at each height before and after rotation of the stylus and workpiece through 180 º are measured and the resulting measurements used to compensate for any error or deviation in the reference datum.
on mesure le déplacement du palpeur depuis une certaine position sur la surface à chaque hauteur, avant et après rotation de 180 º du palpeur et de la pièce, et on utilise les mesures obtenues pour compenser toute erreur ou déviation de l'élément de référence.
A clear datum line is essential for establishing project height references.
The EEC sealing mark shall be affixed on the reference datum.
A predetermined ophthalmic reference datum is also identified.
The vertical reference datum should be stated.
The datum line was marked at a uniform height for all reference points.
each image visualizes both the reference datum and the focal point
This predetermined subset is then fitted with a topology of a surface to establish the reference datum.
Ce sous-ensemble prédéterminé est ensuite ajusté à une topologie d'une surface pour établir le repère de référence.
The features can be registered with respect to either the shape of the laminated cover or some other reference datum.
Ces caractères peuvent être enregistrés en fonction de la forme du revêtement laminé ou d'une certaine autre donnée de référence.