Vertaling van "server1" in Frans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Check to see if a host service principal for server1 exists.
Vérifiez si un hôte principal de service existe pour server1.
The administrator activates the failback wizard in the web console connected to server1.
L'administrateur active l'assistant de retour sur les nœuds principaux dans la console web connecté à server1.
You cannot use mapped drives or UNC paths such as \\server1\share1\, or the period (.) or period and backslach (.\) characters when you specify the log file folder.
Lorsque vous spécifiez le dossier du fichier journal, vous ne pouvez pas utiliser un lecteur connecté ou un chemin d'accès UNC tel que \\serveur1\partage1\, ni un point ou une barre oblique inverse.
PrinterAdmin Print Job Manager is installed on one computer with computer name: server1.
PrinterAdmin Print Job Manager est installé sur un ordinateur avec nom de l'ordinateur: serveur1.
The system goes from step 2 to step 3 when the "start" command is passed on the application module and on server1
Le système passe de l'étape 2 à l'étape 3 lorsque la commande "start" est transmise au module applicatif sur server1
Any change to the file content, such as, to the access control lists, data streams, or attributes can cause an MD5 mismatch and the file is obtained from \\Server1 or other upstream partner.
Toute modification apportée au fichier contenu, tel que, pour le contrôle d'accès aux listes, des flux de données ou des attributs peuvent provoquer une incompatibilité de MD5 et le fichier est obtenu à partir de \\SERVEUR1 ou autre partenaire en amont.
The administrator decides to run the application on server1 and no more on the DR site.
L'administrateur décide d'exécuter l'application sur server1 et non plus sur le site DR.
The host service principal in the keytab file of server1 is used to Add entries for the dtlogin service.
L'hôte principal de service dans le fichier keytab de server1 est utilisé pour authentifier le serveur auprès du KDC maître.
You can do that by moving the primary node for AG2 to the replica instance and immediately the load on SERVER1 falls (Figure 3).
Vous pouvez faire cela en déplaçant le noeud primaire pour AG2 à l'exemple de reproduction et immédiatement la charge sur SERVER1 tombe (le schéma 3).
Note: In this example, the name is Server1.
Remarque: Dans cet exemple, le nom est Server1.
To poll immediately for configuration changes, open a command prompt window and then type the following command once for each member of the replication group: dfsrdiag.exe PollAD/Member:DOMAIN\Server1.
Pour interroger immédiatement les modifications de configuration, ouvrez une fenêtre d'invite de commandes, puis tapez la commande suivante pour chaque membre du groupe de réplication : dfsrdiag.exe PollAD /Member:DOMAIN\Server1.
Then the spare module starts its reintegration from server1 to serverDR on "dir".
Ensuite, le module spare commence sa réintégration de server1 vers serverDR sur "dir".
If the administrator wants to run the application on server1, he/she has to pass the "stopstart" command on 3nodesrepli/server2/PRIM.
Si l'administrateur souhaite exécuter l'application sur server1, il doit passer la commande "stopstart" sur 3nodesrepli / server2 / PRIM.