We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
spanning-tree
arbre maximal
The spanning-tree calculation occurs when the bridge is powered up and whenever a topology change is detected.
Le calcul de spanning-tree se produit quand la passerelle est mise sous tension et toutes les fois qu'une modification de topologie est détectée.
This equates to 300 spanning-tree port instances.
Cela équivaut à 300 instances de port de spanning-tree.
Moreover, the method is used to solve the problem of formation tracking of multiple vehicles interconnected on the basis of a «spanning-tree» topology.
Ensuite, la méthode est utilisée pour résoudre le problème de suivi de formation de plusieurs véhicules interconnectés sur la base d'une topologie « spanning-tree ».
If a bridge fails (causing a topology change), neighboring bridges will detect the lack of configuration messages and will initiate a spanning-tree recalculation.
Si une passerelle échoue (qui entraîne une modification de topologie), les passerelles voisines bientôt détectent le manque de messages de configuration et initient un recalcul de spanning-tree.
You can also use the spanning-tree portfast command per interface, but this requires that you turn off trunking and etherchannel separately to help fix workstation startup delays.
Vous pouvez également utiliser la commande spanning-tree portfast par interface, mais cela nécessite que vous désactiviez le mode Trunk et EtherChannel séparément pour corriger les retards de démarrage de la station de travail.
The Catalyst 4500/4000 that runs Cisco IOS system software uses the spanning-tree guard root command in all releases.
Catalyst 4500/4000, qui exécute la plate-forme logicielle Cisco IOS, utilise la commande spanning-tree guard root dans toutes les versions.
Selectively block ARPs, broadcasts, multicasts and spanning-tree BPDUs.
Bloquez sélectivement les ARPs, les émissions, les Multidiffusions et le spanning-tree BPDU.
The switch ports need to be configured as host ports and have Spanning-Tree Protocol (STP) portfast enabled, and trunking and channeling disabled.
Les ports de commutateur doivent être configurés comme ports hôtes et avec STP (Spanning-Tree Protocol) portfast activé, et l'agrégation de liaison et l'acheminement désactivés.
Related Information Introduction When you monitor Spanning-Tree Protocol (STP) operations, you may be concerned when you see topology change counters that increment in the statistics log.
Introduction Lorsque vous surveillez les opérations du protocole STP (Spanning-Tree Protocol), l'augmentation du nombre de modifications de topologie dans le journal des statistiques peut vous inquiéter.
Unidirectional links can cause a variety of problems, which include spanning-tree topology loops.
Les liaisons unidirectionnelles peuvent poser un certain nombre de problèmes, notamment des boucles de topologie Spanning Tree.
The first activity in spanning-tree computation is the selection of the root bridge, which is the bridge with the lowest-value bridge identifier.
La première activité dans un calcul de spanning-tree est la sélection de la passerelle de racine, qui est la passerelle avec la valeur la plus basse d'identifiant de passerelle.
Potentieel gevoelige of ongepaste informatie
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.