We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
la commande network
la commande réseau
A maximum of 200 entries of the network command are acceptable.
When routes are announced using a basic network statement, the behavior of the network command varies depending on whether auto-summary is enabled or disabled.
Lorsque des routes sont annoncées à l'aide d'une instruction réseau de base, le comportement de la commande network varie selon que la commande auto-summary est activée ou désactivée.
You can set up a data store that connects to the NAS, or use the network command in the console to test the connection.
Vous pouvez maintenant créer un magasin de données qui pourra se connecter au serveur NAS, ou utiliser la commande réseau de la console pour tester la connexion.
NetCat, or NC, is the network command most versatile that exists nowadays and one of the lightest.
NetCat, ou NC, est la commande réseau plus polyvalente qui existe et l'une des plus légères.
The difference is that routes that generate from the network command, redistribution, or static indicate your AS as the origin of these networks.
La différence est que les routes générées par la commande network, la redistribution, ou les routes statiques indiquent votre AS en tant qu'origine de ces réseaux.
In this example, a component route 192.168.33.0 is installed into the BGP table using the network command.
Dans cet exemple, une route de composant 192.168.33.0 est installée dans la table BGP à l'aide de la commande network.
The minimum requirement for a prefix configured under the network command to be installed in a BGP table is to have a component route in the IP routing table.
La condition minimale pour un préfixe configuré sous la commande network devant être installé dans une table BGP est d'avoir une route de composant dans la table de routage IP.
Again, the difference is that the network command adds an extra advertisement for these same networks, which indicates that AS300 is also an origin for these routes.
De nouveau, la différence est que la commande network ajoute une annonce supplémentaire pour ces réseaux qui indique qu'AS300 est également une origine pour ces routes.
RIP v2 must be configured with the network command and the IP host address and subnet mask for the newly activated interface.
RIP v2 doit être configuré avec la commande network, l'adresse hôte IP et le masque de sous-réseau de la nouvelle interface active.
This example uses the network command to inject networks into BGP.
Cette exemple utilise la commande network pour injecter des réseaux dans BGP.
If the - device= option is missing on the first use of the network command, the value of the ksdevice= Anaconda boot option is used, if available.
Si l'option - device= manque à la première utilisation de la commande network, la valeur de l'option de démarrage ksdevice= d'Anaconda est utilisée, si disponible.
RIP v2 must be configured with the network command and the IP network number for the new network.
RIP v2 doit être configuré avec la commande network et le numéro IP du nouveau réseau.
To work around this issue, either use the ksdevice=link boot option, or add the - device=link option to the network command in your Kickstart file.
Un moyen de contourner ce problème consiste à utiliser l'option de démarrage ksdevice=link, ou à ajouter l'option - device=link à la commande network dans votre fichier Kickstart.
Potentieel gevoelige of ongepaste informatie
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.