Vertaling van "ARP/MARS" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
In this mode, the ARP/MARS acts as a multicast server, providing active forwarding of all multicast and broadcast traffic destined for IP addresses contained within the ranges specified in the list.
このモードでは、ARP/MARS はマルチキャスト サーバーとして動作し、一覧に指定された範囲内にある IP アドレス向けのすべてのマルチキャストおよびブロードキャスト トラフィックをアクティブに転送します。
multicast address resolution service See ARP/MARS service
マルチキャスト アドレス解決サービス, ARP/MARS サービスを参照
If the list is empty, ATM ARP/MARS defaults to non-hubbed mode operation, in which it does not perform any forwarding for multicast group clients.
一覧が空の場合は、 ATM ARP/MARS は非ハブ モードに既定で設定されます。このモードでは、マルチキャスト グループ クライアントの転送は実行されません。
ATM ARP/MARS then establishes point-to-multipoint virtual connections for requesting group members for multicasting.
その後、ATM ARP/MARS は、マルチキャストのグループ メンバを要求するためのポイント ツー マルチポイント仮想接続を確立します。
A mode in which the ATM ARP/MARS does not forward multicast and broadcast traffic for multicast group clients.
ATM ARP/MARS がマルチキャスト グループ クライアントにマルチキャストおよびブロードキャストのトラフィックを転送しないモード。
If you use another ARP/MARS server, the client must be configured with the ATM address of that server.
ARP/MARS サーバーをもう 1 つ使用する場合は、クライアントにそのサーバーの ATM アドレスを構成する必要があります。
In order for the default setup to work, the ATM ARP/MARS service must be running on a server on the network.
既定の設定を使用するには、ネットワークのサーバー上で ATM ARP/MARS サービスを実行する必要があります。
The ATM ARP/MARS service includes a preconfigured default list of IP address ranges for which broadcast and multicast forwarding are provided by the service.
ATM ARP/MARS サービスには、事前構成された IP アドレス範囲の既定一覧が含まれています。サービスが提供するブロードキャストおよびマルチキャスト転送機能は、この一覧を使って転送を行います。
Click to edit a selected ATM ARP/MARS server address in the list.
一覧で選択した ATM ARP/MARS サーバー アドレスを編集するときにクリックします。
If the list is not empty, ATM ARP/MARS uses hubbed mode operation.
一覧に何も表示されていない場合、ATM ARP/MARS はハブ モードを使用します。
Only one ATM ARP/MARS server may use the default address.
既定のアドレスが使用できるのは、1 つの ATM ARP/MARS サーバーのみです。
In most cases, default client settings provide rapid configuration, and ATM ARP clients are preconfigured with default ARP/MARS addresses.
ほとんどの場合、迅速な構成が可能なのは既定のクライアント設定です。ATM ARP クライアントは、既定の ARP/MARS アドレスであらかじめ構成されています。
Lists the available IP address pairs for which broadcast and multicast forwarding is provided by ATM ARP/MARS.
ATM ARP/MARS によってブロードキャストおよびマルチキャスト転送が提供される IP アドレスの組み合わせを一覧表示します。