I don't have floppy disk drives, so I typically burn a bootable CDRom with DOS 6.22 and drive to the data center to manually update the server. Here is an approach that is more convenient, but riskier. Copy BIOS Settings I use a screen capture plugin and Dokuwiki to record all of the BIOS settings into my personal wiki.
私は、フロッピーディスクドライブを持っていない, 私は一般的に、DOSでブート可能なCD-ROMドライブを燃やす 6.22 そして手動でサーバーを更新するために、データセンターに車. ここでは、より便利なアプローチがある, しかし、リスクの高い. コピーのBIOS設定 私が使用して スクリーンキャプチャプラグインともしくはカスタマイズ 私の個人的なウィキにBIOS設定のすべてを記録するために.
Andere resultaten
If you are not sure if your CDROM is bootable or not, power on the machine and go to BIOS settings (do not let the PC boot up).
CD-ROM からの起動が可能かどうか分からない場合は、マシンの電源を入れ直して、BIOS 設定の画面を開いてください(これは PC が起動する前に開く必要があります)。
If your Windows install CD is bootable, you'll need to have a "Windows boot disk" section which chain loads to whatever your CDROM device is called.
お手もとの Windows のインストール CD がブート可能なら、 CDROM デバイスが呼ばれた時にはいつでも続いて呼び出せるように ``Windows boot disk`` という部分が必要になります。
A Windows/DOS boot disk with CDROM support and a CD with the Windows 9x install on it, or a bootable Windows 9x install CD. (Recommended)
CDROM をサポートしている Windows/DOS ブートディスクとWindows 9x がインストールしてある CD、 または、起動可能な Windows 9x インストール CD があること。