Verify that the correct serial cable is connected to a com port.
通信ポートに接続しているシリアル・ケーブルが正しいことを確認してください。
COM port should be a single digit in ConnectEMC.
ConnectEMCでは、通信ポートは一桁の数値でなければなりません。
The firmware also implements a virtual com port that provides access to internal parameters for reading metrology data, modifying the internal configuration, and calibrating the board.
また、このファームウェアは内部パラメータにアクセスするための仮想COMポートも備えているため、計測データの読み込みや内部設定の変更、およびボードのキャリブレーションにも対応可能です。
This COM name is being used by another device (such as another com port or modem). Using duplicate names can lead to inaccessible devices and changed settings. Do you want to continue?
この COM 名は別のデバイス (別の COM ポートまたはモデムなど) により使用されています。重複した名前を使用すると、デバイスおよび変更された設定にアクセスできなくなります。続行しますか?
Select the connected device on the Com Port.
Com Port にて接続中のデバイスを選択します。
The desired standard channel can be selected in the selection field Com Port.
目的の標準チャネルは、選択フィー ルド Com Port で選択できます。
A quick fix is to simply use the other com port for the modem.
手っ取り早い解決法は、他の com ポートを使うというものです。
Something that surprised me when I first installed (before I hooked the machine into the local ether net network and while I was using PPP): my modem wouldn't work on the first com port.
イーサカードによってローカルネットワークに接続する前に、PPP を使おうと思いましたが、com ポート 1 につないだモデムが動きません。
The modem remains on the same com port (same IO address) that it used under DOS.
モデムは DOS で使用したものと同じ COM ポート(同じ IO アドレス)を記憶しています。
For firmware, we need: Zero modem cable (RS232) Loader Firmware file Computer with com port How to flash tuner? How to flash the satellite receiver tuner through a computer We connect the computer with a modem cable and disconnected from the 220 V network. tuner.
ファームウェアでは、必要です。 ゼロモデムケーブル(RS232) ローダ ファームウェアファイル COMポートを持つコンピューター Flashチューナーへの方法 衛星受信機チューナーをコンピュータを介してフラッシュする方法 コンピュータをモデムケーブルで接続し、220 Vネットワークから切り離します。
We could therefore try invoking the program with xmdipmon -pidfile/var/lock/LCK... ttyS3 (this assumes that the modem is on com port #4, ttyS3).
したがって、としてプログラムを起動すればよいかもしれません(この例ではモデムは COM ポート 4 番、ttyS3 にあるものとしています)。
In addition, it offers multiple interface options: Keyboard wedge, USB, RS232 and USB emulation com port driver.
さらにMS250は、キーボードウェッジ、 USB、 RS232 、USB仮想COMポートというさまざまなインターフェースオプションを用意しています。
An FTDI FT232RL on the board channels one of these over USB and the FTDI drivers (included with the Arduino software) provide a virtual com port to software on the computer.
Duemilanoveが搭載するFTDI FT232RLチップはこのシリアル通信をUSB上の通信に変換し、FTDIドライバ(Arduinoソフトウェアの配布物に同梱してあります)によって、パソコン上では仮想COMポートとして認識されます。