A positively charged electrode was used to attract the electrons.
電子を引きつけるために、正に帯電した電極が使われました。
As a result, the electrode is connected to the metal.
Therefore, there is almost no restriction to the electrode current.
そのため、電極電流にはほとんど制限がない。
The auxiliary electrode may be embedded in the anode support.
補助電極がアノード支持体に埋められてもよい。
The glass shell of the electrode acts as a dielectric.
電極のガラスシェルは誘電体として機能します。
Along with the central electrode, the side is installed.
中心電極とともに、側面が取り付けられています。
At first, only these methods of electrode guidance are required.
最初は、これらの電極誘導方法のみが必要です。
Check between adjacent circuits and each surface to reference electrode.
隣接する回路と基準電極の各表面間を確認。
Easy to replace the sensor, electrode stack and lamps.
センサ、電極スタック、ランプの交換が簡単です。
This makes it possible to reduce the capacitance of a gate electrode.
これにより、ゲート電極容量を小さくすることができる。
Furthermore, at least one of the electrodes is a mesh electrode.
また、少なくとも一方の電極は、網目電極である。
High accuracy measurement is possible with the built-in amplifier electrode.
増幅器内蔵の電極で、精度の高い測定が可能。
The electrode can be incorporated in an electric storage device.
この電極は蓄電デバイスに組み込むことができる。