Vertaling van "exec service" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Backup will fail with remote exec service if passwords are not configured correctly
パスワードが正しく構成されていない場合、リモート実行サービスを使用したバックアップに失敗する
The remote user and password field for the client is configured to use the same username and password as the Remote Exec service.
クライアントの[リモート ユーザー]および[パスワード]フィールドが、リモート実行サービスと同じユーザー名およびパスワードを使用するように構成されている。
The error might be caused by the <:v "NetWorker" 1> Remote Exec service not running on the storage node.
このエラーは、<:v "NetWorker" 1>リモート実行サービスがストレージ・ノード上で実行されていないために発生した可能性があります。
A <:v "Sun StorageTek EBS" 1> Remote Exec service on a client machine is configured so that the service is initiated by a local system account.
サービスがローカル・システム・アカウントにより開始されるように、クライアント・マシン上の<:v "Sun StorageTek EBS" 1>リモート実行サービスが実行されている。
Reboot the <:v "NetWorker" 1> client or storage node host computer and verify that the <:v "NetWorker" 1> Remote Exec service has started.
<:v "NetWorker" 1>クライアントまたはストレージ・ノード・ホスト・コンピュータを再起動して、<:v "NetWorker" 1>リモート実行サービスが開始したことを確認します。
The <:v "NetWorker" 1> Remote Exec service must be running on each storage node within the cluster.
<:v "NetWorker" 1> リモート実行サービスが、クラスタ内の各ストレージ ノード上で実行されている必要があります。
If the <:v "NetWorker" 1> Remote Exec service is not running
<:v "NetWorker" 1> リモート実行サービスが実行されていない場合
These steps stop the <:v "NetWorker" 1> Remote Exec service and restart all of the <:v "NetWorker" 1> services.
これらの手順は、<:v "NetWorker" 1> リモート実行サービスを停止し、すべての <:v "NetWorker" 1> サービスを再起動します。
<:v "NetWorker" 1> Remote Exec service must be installed and running.
<:v "NetWorker" 1>リモート実行サービスがインストールされて実行している必要がある。
To avoid this issue, configure the <:v "Sun StorageTek EBS" 1> Remote Exec service on the client to initiate with the local system account and populate the Remote User and Password fields of the client using the <:v "Sun StorageTek EBS" 1> Administrator program.
この問題を回避するには、クライアント上の<:v "Sun StorageTek EBS" 1>リモート実行サービスがローカル・システム・アカウントで開始されるように構成し、<:v "Sun StorageTek EBS" 1>管理者プログラムを使用してクライアントの[リモート ユーザー]および[パスワード]フィールドに入力します。
Right-click the NetWorker Remote Exec service name and select Start.
NetWorker リモート実行サービス名を右クリックして、[開始] を選択します。
before NetWorker Remote Exec Service starts communicating with other machines.
これは、NetWorker Remote Execサービスが他のマシンとの通信を開始する前に行います。
NOTE: Library Attach version 1.1 includes a portmapper function that will only install properly if the NetWorker services are not running. You should use Control Panel to stop the "NetWorker Backup and Recover Server" and the "NetWorker Remote Exec Service" before installing Library Attach. After Library Attach is installed, you should use Control Panel to start "NetWorker Remote Exec Service" and "NetWorker Backup and Recover Server".
注記:Library Attachのバージョン1.1にはポートマッパ関数が 含まれており、適切なインストールができるのは、NetWorkerサービス を実行していない場合だけです。Library Attachをインストールする 前に、コントロール パネルを使用して "NetWorkerバックアップ/リカバリ サーバ"および "NetWorker Remote Execサービス"を停止します。Library Attach のインストール後、コントロール パネルで "NetWorker Remote Execサービス"および "NetWorkerバックアップ/リカバリ サーバ"を起動します。