The condition so referenced is effectively qualified by the file control block associated with f.
このように参照される条件は、f に関連付けられたファイル制御ブロックによって修飾されます。
Thus, ENDFILE(g) and ENDFILE(h) are different conditions if g and h identify different file control blocks, but they are the same condition if g and h identify the same file control block.
したがって、ENDFILE(g) と ENDFILE(h) については、g と h が異なるファイル制御ブロックを識別する場合は異なる条件になりますが、g と h が同じファイル制御ブロックを識別する場合は同じ条件になります。
A file control block is a data structure that stores information about a file.
ファイル制御ブロックとは、ファイルに関する情報が格納されるデータ構造のことです。
The end-of-file status of the file control block remains set so that subsequent reads also cause the signal to occur.
ファイル制御ブロックのファイルの終わりステータスは、後続の読み取りでも信号が発生するように設定されたままになります。
File Control Block (FCB): A small block of memory temporarily assigned by a computer's operating system to hold information about an opened file.
ファイル制御ブロック(fcb ) : 一時的に開けられたファイルについての把握情報にコンピュータのオペレーティングシステムによって割り当てられる記憶の小さいブロック。
Both of these methods properly format a file name for a file control block at address CS:5C.
どちらの場合も、ファイル名はアドレス CS:5C にあるファイル制御ブロックに合わせて正しくフォーマットされます。
File control block (FCB) for file 1
ファイル 1 のファイル制御ブロック (FCB)
Just before these conditions are signaled, the value of the ONFILE built-in function is set to the file ID of the file control block for which the condition is being signaled.
これらの条件が通知される直前に、ONFILE 組み込み関数の値は、条件が通知されているファイル制御ブロックのファイル ID に設定されます。
The file name is correctly formatted for a file control block (FCB) at CS:5C.
ファイル名は、CS:5C にあるファイル制御ブロック (FCB) に合わせて正しくフォーマットされます。
The ON-conditions ENDFILE, ENDPAGE, KEY, and UNDEFINEDFILE are uniquely established for each file control block and are always written with a reference f that must identify a file value.
ON 条件の ENDFILE、ENDPAGE、KEY、および UNDEFINEDFILE は、ファイル制御ブロックごとに一意に確立され、常に、ファイル値を識別する参照 f を使用して書き込まれます。
Andere resultaten
Most newer programs do not require file control blocks.
新しいバージョンのプログラムのほとんどは、ファイル制御ブロックを必要としません。
Specifies the number of file control blocks (FCBs) that the MS-DOS subsystem can have open at the same time.
MS-DOS サブシステムで同時に開くことができるファイル制御ブロック (FCB) の数を指定します。
If a program tries to open more than x files by using file control blocks, the MS-DOS subsystem might close the files that were opened earlier.
プログラムでファイル制御ブロックを使って x 個以上のファイルを開こうとすると、開かれているファイルが MS-DOS サブシステムによって閉じられることがあります。