Download for Windows Premium
Publiciteit
higher level assembly

Vertaling van "higher level assembly" in Japans

We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
上位レベルの組立品
上位レベル組立品
Yes: If you select this value, phantom routing components and resources are included in the cost of the higher level assembly. Resource overhead costs are charged to the department owning the resource. Routing resource costs are also included in capacity planning.
Yes: この値を選択すると、擬似工順の構成部品と生産資源は、上位レベルの組立品の原価に含まれます。生産資源間接費は、その生産資源を所有する部門にチャージされます。工順ンの生産資源費は、生産能力計画にも含まれます。
Component, resource, and overhead costs for Assemble To Order items defined as model or option types are defined on the item's configured bill of material as phantoms. They differ from typical phantoms in that their component and routing costs are not charged to the parent or higher level assembly, and they are not affected by the setting of either of these two Bills of Material parameters.
モデルまたはオプション・タイプとして定義された受注組立品目の構成部品原価、生産資源費および間接費は、品目の構成済部品構成表に擬似として定義されます。これらは、構成部品原価と工順原価が親または上位レベルの組立品にチャージされない点とOracle Bills of Materialの2つのパラメータのいずれの設定にも影響されない点で、一般的な擬似とは異なります。
You have the option to include resource and overhead charges in the cost of the parent or higher level assembly. This feature is enabled when you set up the Oracle Bills of Material BOM:Use Phantom Routings parameter to have "Yes" as its value. You set this parameter at the inventory organization level and it applies to all phantoms within a single inventory organization. Routing resources and their costs are then also included in capacity planning.
生産資源費および間接費を親または上位レベルの組立品の原価に含めるオプションがあります。この機能は、Oracle Bills of MaterialのBOM: 擬似工順を使用パラメータの値をYesに設定すると使用可能になります。このパラメータを在庫組織レベルで設定すると、単一の在庫組織内の擬似品目すべてに設定が適用されます。工順の生産資源とその原価は、生産能力計画でも考慮されます。
An assembly used as a component in a higher level assembly.
上位レベルの組立品では構成部品として使用される組立品。
Set this parameter to specify whether phantom subassembly components inherit the operation sequence number of their parent or higher level assembly, or maintain their own operation sequence number. This parameter is set at the inventory organization level, and applies to all phantoms within a single inventory parameter has these two values
このパラメータを設定して、擬似半組立品の構成部品が親または上位レベルの組立品の工程連番を継承するか、つまり、擬似半組立品の構成部品自体の工程連番を保持するかどうかを指定します。在庫組織レベルでこのパラメータを設定すると、単一の在庫組織内すべての擬似に対して適用されます。パラメータに設定する値は、次の2つの値のいずれかです。
Inherit Phantom Op Seq: Set this parameter to specify whether phantom subassembly components inherit the operation sequence number of their parent or higher level assembly, or maintain their own operation sequence number. This parameter is set at the inventory organization level, and applies to all phantoms within a single inventory parameter has these two values
疑似工程連番を引継ぐ: このパラメータでは、疑似半組立品の構成部品にその親または上位レベル組立品の工程連番が引き継がれるか、または固有の工程連番が維持されるかを指定します。これは在庫組織レベルで設定するパラメータで、単一在庫組織内のすべての疑似品目に適用されます。このパラメータには、次の2つの値があります。
Use Phantom Routings: Set this parameter to specify whether phantom routing resources and overhead costs (including those for outside processing resources assigned to phantom routing operations) are charged to the parent or higher level assembly. Setting this parameter also implies department inheritance for resources; thus, phantom resources can be used by departments that they are not owned by or assigned to as a borrowed resource. You set the parameter at the inventory organization level and it then applies to all phantoms within a single inventory organization. These are its two values
疑似工順を使用: このパラメータを設定した場合は、疑似工順の生産資源および間接費(疑似工順工程に割り当てた外注生産資源の原価を含む)を、親または上位レベル組立品に賦課するかどうかを指定します。また、このパラメータを設定すると、生産資源は部門で引き継がれることを意味するため、疑似生産資源を所有しない部門が使用したり、借用生産資源として割り当てることができます。これは在庫組織レベルで設定するパラメータで、単一の在庫組織内のすべての疑似品目に適用されます。このパラメータには、次の2つの値があります。
This method works well if your plant is set up with feeder lines that physically flow to consuming lines. For example, assume you build a subassembly on a feeder line that ends at the consumption point of the subassembly into the higher level assembly. You can set the completion subinventory and locator on the subassembly to be the supply subinventory and locator of the subassembly on the next level bill of, as you complete the subassembly into its completion subinventory and locator using the Completion Transactions window, Move Transactions window, or the Inventory Transaction Interface, you automatically replenish the supply subinventory and locator on the next level bill of material.
この方法は、供給ラインが物理的に消費ラインにそのまま接続するようなプラントの場合に特に有効です。たとえば、ある供給ラインで半組立品を作成し、その供給ラインの終点が、上位レベルの組立品を製造するときにその半組立品を使用する場所であるとします。この場合、その半組立品の完了保管場所および保管棚を、その上のレベルの部品構成表の半組立品の供給保管場所および保管棚にできます。完了取引ウィンドウ、移動取引ウィンドウまたは在庫取引インタフェースでその半組立品を完了して、完了保管場所および保管棚に移動したときに、その上のレベルの部品構成表の供給保管場所および保管棚を自動的に補充することになります。
If you want Work in Process to maintain the individual operation sequence numbers for phantom subassemblies, and to charge their resource and overhead costs to the parent or higher level assembly, you set the following two parameters in Oracle Bills of Material
Oracle Work in Processで擬似半組立品に対する個々の工程連番を保持し、その生産資源費と間接費を親または上位レベルの組立品にチャージする場合は、Oracle Bills of Materialで次の2つのパラメータを設定します。
You can include phantom resources in your routings. When the phantom is the parent or higher level assembly, its component costs are included in the parent cost, they inherit the operation sequence number from the parent, and their resources and overheads are excluded from the parent or higher level assembly cost. If you want phantom components to maintain their own operation sequence numbers, and if you want resource costs included in the parent cost - set the Bills of Material parameters BOM:Use Phantom Routings and BOM:Inherit Phantom Operation Sequence parameters. See: Phantom Assemblies.
擬似生産資源を工順に割り当てることができます。親または上位レベルの組立品が擬似組立品の場合、その構成部品原価は親原価に含まれ、親から工程連番を引継ぎます。また、擬似組立品の生産資源費および間接費は、親または上位レベルの組立原価から除外されます。擬似構成部品を固有の工程連番で保守する場合、および擬似構成部品の生産資源費が親の原価に含まれるようにする場合は、部品構成表のBOM: 擬似工順を使用およびBOM: 擬似工程連番を引継ぐパラメータを設定します。関連項目: 擬似組立品
Set this parameter to specify if phantom routing resource costs (including outside processing resources assigned to phantom routing operations) are charged to the parent or higher level assembly. Setting this parameter also implies department inheritance for resources; thus, phantom resources can be used by departments that they are not owned by or assigned to as a borrowed resource. Resource overhead costs are always charged to the department owning the resource, not the higher level assembly. You set the parameter at the inventory organization level and it then applies to all phantoms within a single inventory organization. These are its two values
このパラメータを設定して、擬似工順の生産資源費(擬似工順工程に割り当てられている外注加工生産資源も含む)を親または上位レベルの組立品にチャージするかどうかを指定します。このパラメータの設定は、生産資源を部門が継承することも意味します。つまり、擬似生産資源を所有していない部門が使用したり、借入生産資源として割り当てることができます。生産資源間接費のチャージ先は、上位レベルの組立品ではなく、常に生産資源の所有部門です。在庫組織レベルでこのパラメータを設定すると、単一の在庫組織内すべての擬似に対して適用されます。パラメータに設定する値は、次の2つのいずれかです。
Phantom subassembly component costs are included in the higher level phantom assembly cost, and the components automatically inherit the operation sequence number of the parent assembly. Resource costs and overhead for these components, however, are not considered in the parent or higher level assembly cost. You have the option to specify that phantom subassemblies and their resources are visible in Work in Process and are charged by Oracle Cost Management. You also can specify that phantom subassemblies maintain their own operation sequence numbers and that their resource and overhead costs are charged to the parent or higher level assembly by setting up two parameters in Oracle Bills of Material.
擬似半組立品の構成部品原価は、上位レベルの擬似組立品の原価に含まれ、この構成部品は親組立品の工程連番を自動的に継承します。ただし、この構成部品の生産資源原価と間接費は、親または上位レベルの組立原価では考慮されていません。擬似半組立品とその生産資源をOracle Work in Processで表示し、Oracle Cost Managementでチャージするように指定するオプションがあります。また、Oracle Bills of Materialにある2つのパラメータを設定して、擬似半組立品がそれ自体の工程連番を保持し、その生産資源費と間接費が親または上位レベルの組立品にチャージされるように指定できます。
Er zijn geen resultaten gevonden voor deze term.
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.

Synoniemen voor higher level assembly in het Engels

Woord & uitdrukking van de dag
Afbeelding van de dag
aisle: passage between shelves in a supermarket or store
Ontdek het woord
Publiciteit

Suggesties

Resultaten: 12. Exact: 12. Verstreken tijd: 19 ms.