Thus, the high speed lock pin can be inserted into the high speed pin lead-in hole, and the phase of the intake camshaft relative to the exhaust camshaft can be fixed.
それにより、高速ロックピンが高速ピン導入孔に挿入され、排気カムシャフトに対する吸気カムシャフトの位相が固定される。
Accordingly, the end part of the drawing hand positioned at the tip of the slide glass is pushed into the tapered lead-in part of the positioning guide according to the retreating operation of the drawing hand.
そのため、引出しハンドの後退動作に伴ってスライドガラスの先端に位置する引出し端部が位置決めガイドのテーパー導入部に押し込まれる。
Defines linear or circular lead-in type for last flank
最後の側面に対し直線または円形のリード イン タイプを定義します
Length of the lead-in before the inverted machined profile.
反転された加工プロファイル前のリード インの長さ。
Use this to clip off a rollup or useless lead-in.
ロールアップや不要な導入部を切り取るときに使ってください。
Optimize your video lead-in.
動画の導入部を最適化しましょう。
A complete track with lead-in and lead-out information.
リードイン/リードアウト情報を持つ完全なトラック。
Defines the lead-in angle on the last flank of the groove.
溝の最後の側面上のリード イン角度を定義します。
In the lead-in area (13), information indicating a characteristic range of a signal detected by an optical head from a groove track is previously recorded.
そして、このリードイン領域12に、グルーブトラックから光ヘッドで検出される信号の特性範囲を示す情報が予め記録されている。
Defines linear or circular lead-in type for other flanks
他の側面に対し直線または円形のリード イン タイプを定義します
Defines linear or circular lead-in type path to the profile
プロファイルに対し直線または円形のリード イン タイプを定義します
Defines the lead-in radius on the other flanks of the groove.
溝の他の側面上のリード イン半径を定義します。
However, replacing an established test stand to keep up with industry trends is a costly investment - while potentially resulting in long lead-in and transition times.
しかし、業界の動向に追いつくために設置済みのテストベンチを交換することは、費用のかかる投資であり、導入期間や移行期間が長くなる可能性があります。