Vertaling van "lilo boot" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
For floppy rescue boot, you may want to specify this on the kernel command line or in the loadlin or lilo boot file
フロッピーディスクの復旧システムを起動する場合には,カーネルのコマンドライン,loadlin あるいは LILO の起動ファイルにこの記述をします.
If the machine is set up this way, then the master boot record gets read and loaded by the bios, and it loads the lilo boot loader, which gives a prompt.
マシンが上記のように設定されているなら、bios によってマスターブートレコードが読み込まれてロードされ、次に(ロードされたプログラムが) lilo のブートローダをロードし、それがプロンプトを表示する。
8.1.5 Other boot tricks with the boot prompt The system can be booted into a particular runlevel and configuration using the lilo boot prompt.
8.1.5 ブートプロンプトを使った他のブートトリック lilo のブートプロンプトを使ってシステムを特定のランレベル と設定でブートすることができます。
What we are going to do is just the same, except that the boot sector in hda2 is going to be another lilo boot sector - the one that QuickInst is going to install.
これからしようとしていることは、hda2 のブートセクタがそれとは異なる lilo のブートセクタ(つまり QuickInst がこれからインストールしようとしているセクタ)になるということを除けば、上記と全く同じことである。
A lilo boot parameter is needed for a system containing more than 64MB of memory with an old BIOS.
BIOSが古く、64MB 以上のメモリを搭載しているシステムには 特別な lilo ブートパラメータが必要です。
On which hard disk partition do you want LILO boot loader to reside?
LILO ブートローダをどのディスクのパーティションに置きますか?
The LILO boot sector is designed to be usable as a partition boot sector.
LILO のブートセクターは、パーティションブートセクターとして使用できるように設計されています。
LILO boot loader sample configuration
LILO ブートローダーの設定サンプル
LILO boot error codes.
LILO のブート時のエラーコード
Slackware (v..1) uses a straightforward LILO boot similar to what is described in section.
Slackware (バージョン 3.1)はの節で述べたような,素直な方法を使っています.
This title replaces the default "LILO Boot Menu" title string.
このタイトルはデフォルトのタイトル文字列 "LILO Boot Menu" を置き換える。
(I.e. there is room for the partition table.) Therefore, the LILO boot sector can be stored at the following locations: - boot sector of a Linux floppy disk.
(つまりパーティションテーブル用のスペースを確保してます)そのため、LILO ブートセクターは、以下のような場所に置くことができます。 Linux フロッピーディスクのブートセクター。
Two disks, Linux on second disk, first disk has no extended partition - If there is neither a Linux partition nor an extended partition on the first disk, then there's only one place left, where a LILO boot sector could be stored: the master boot record.
ディスクが 2 つで、Linux は第 2 ディスクにあり、第 1 ディスクは論理パーティションがない第 1 ディスクに、Linux パーティションも拡張パーティションもない場合、もはやLILO ブートセクターを置ける場所は、一箇所しかありません。 - そこはマスターブートレコードです。