For portable designs, even a simple linear regulator can provide some challenges.
The efficiency of a linear regulator is directly related to the power dropped across its pass transistor.
The off-mode power comes from the shutdown current of the linear regulator.
オフモードの消費電力は、リニア・レギュレータのシャットダウン電流で決まります。
The device also integrates a linear regulator to provide a quiet rail for radios or processors and can be independently sourced and controlled through I2C.
また、デバイスにはリニア・レギュレータも内蔵されており、無線やプロセッサ用に低ノイズのレールを提供し、I2C経由で独立にソースおよび制御が可能です。
For this reason, the major part of linear regulator heat loss occurs in the output driver.
そのため、リニアレギュレータの熱損失の大半はこの出力ドライバ部分で発生します。
This linear regulator offers the benefit of simple design.
リニアレギュレータは、設計がシンプルである点がメリットです。
For that reason, a linear regulator is best suited to low-power applications.
詳しく解説熱損失とは ? そのため、一般的には、リニアレギュレータは小電力の用途に向いていると言えます。
This section provides the operating principles of the linear regulator, and describes its main specifications and thermal calculation.
本項では、リニアレギュレータの動作原理を始め、主要スペックや熱計算の説明をします。
A simple solution implements a linear regulator, as this device requires only a few capacitors and adequate thermal management.
簡単なソリューションはリニアレギュレータを使うことです。このデバイスは適切な温度管理を必要としますが必要とするコンデンサが少なくて済むからです。
Because most voltage conversion occurs in the switching regulator, however, the efficiency penalty is much smaller than for a lone linear regulator.
殆どの電圧変換はスイッチングレギュレータで起こるため、リニアレギュレータのみの場合に比べて効率の損失はずっと少なくて済みます。
The figure below shows a model providing a simplified view of a linear regulator.
次の図は、リニアレギュレータを簡略化したモデルです。
This is an efficiency improvement of 40% over the linear regulator.
これは、リニアレギュレータに対して40%の効率改善になります。
It also explains why adding a linear regulator can reduce power consumption, even though the conversion is inefficient and input current is basically equal to the output current.
また、変換が非効率で入力電流は基本的に出力電流に等しいとは言え、リニアレギュレータの追加によって消費電力を低減することができる理由も説明されます。